Insignia NS-AC12PWH9 User Guide - Page 17

NS-AC10PWH9 / NS-AC12PWH9 / NS-AC10PWH9-C / NS-AC12PWH9-C 3 Remove the filter case. 4 Install a 0.47 in. (12 mm) inside diameter drain hose (not provided) on the back of the unit where you removed the water plug. Use a hose clamp (not provided) to make sure that there are no leaks. 5 Replace the filter case. 6 Place the open end of the hose in a suitable location to drain continuously. 7 Plug in your air conditioner and restart it. 8 Set your air conditioner to DRY mode using either the remote control or the control panel. Storing your air conditioner If your air conditioner will not be used for an extended period of time, we suggest that you prepare it for storage by doing the following: 1 Unplug your air conditioner. 2 Remove the rubber plug and drain the water collection tank completely. 3 Reinstall the rubber plug. 4 Remove the filter case and clean the filter. Allow it to dry completely, then reinstall it. 5 Remove the batteries from the remote control. 6 Store the air conditioner in a cool, dry place, away from direct sunlight, extreme temperatures, and excessive dust. Restarting your air conditioner after storage 1 Make sure that the filter case and rubber plug are in place. 2 Make sure that the power cord and plug are in good condition. 3 Install new AAA batteries in the remote control. 4 Move the air conditioner to the location where you plan to use it and reconnect the exhaust hose and electrical plug. 5 Restart your air conditioner and make sure that everything runs smoothly. www.insigniaproducts.com 17