Insignia NS-BC115SS9 User Guide - Page 12

Setting the temperature • Press the temperature up or down buttons to increase or decrease the temperature by one degree. The temperature range is 34°-50° F (1°-10° C). • Press and hold the temperature up and down buttons at the same time for three seconds to switch between Fahrenheit and Celsius. Notes: • A large number of beverages lowers the cooling efficiency of your cooler. • When you put several beverages in your cooler at one time, the temperature in your cooler may rise temporarily. • Adjust the thermostat setting by one increment at a time. Allow several hours for the temperature to stabilize between adjustments. • The screen display always shows the set temperature. When adjusting the temperature, the temperature display blinks to indicate that the temperature is being adjusted. Memory function If you experience a power outage, when your cooler is turned on again it resumes the same temperature that was set when the power went off. Using the display • When you plug in your cooler for the first time, the display screen turns on for three seconds and you hear a start-up tone. • In normal mode, the display shows the set temperature. Lighting your cooler • Press the light button to turn the interior light on and off. Using the adjustable shelves • All of the shelves have tabs to engage the cabinet on both sides. • Any of the shelves can be removed to accommodate larger beverages. To remove a shelf: 1 Remove all beverages from the shelves. 2 Lift the shelf upward and then gently pull out the shelf. To replace a shelf: • Place the sides of the shelf back onto the supporting guides in the cabinet and push back until the shelf tabs slide into place. CAUTION: Make sure that the tabs are firmly engaged in the supporting guides before storing any beverages. Arranging your beverages In order to maintain good air circulation in your cooler, do not let the beverages touch the back of your cooler. 12 www.insigniaproducts.com