Insignia NS-BC1ZSS9 User Guide

Insignia NS-BC1ZSS9 Manual

Insignia NS-BC1ZSS9 manual content summary:

  • Insignia NS-BC1ZSS9 | User Guide - Page 1
    USER GUIDE 165-Can Beverage Cooler NS-BC1ZSS9 Before using your new product, please read these instructions to prevent any damage.
  • Insignia NS-BC1ZSS9 | User Guide - Page 2
    Contents Introduction 3 IMPORTANT SAFETY INSTRUCTIONS 3 Features 6 Package contents 6 Components 6 Control and display panel 7 Setting your beverage cooler 20 Tips on saving energy 20 Troubleshooting 20 Error codes 20 Problems and solutions 21 Specifications 21 ONE-YEAR LIMITED WARRANTY
  • Insignia NS-BC1ZSS9 | User Guide - Page 3
    Cooler Introduction Congratulations on your purchase of a high-quality Insignia product. Your NS-BC1ZSS9 represents the state of the art in beverage cooler design and is designed for reliable and trouble-free performance. IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This
  • Insignia NS-BC1ZSS9 | User Guide - Page 4
    NS-BC1ZSS9 off the appliance before unplugging it. 18 Refer all servicing to qualified service personnel. Servicing is required when the appliance has been damaged in any of it. WARNING Electric Shock Hazard Failure to follow these instructions can result in electric shock, fire, or death. 1 WARNING
  • Insignia NS-BC1ZSS9 | User Guide - Page 5
    experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for component part is damaged, it must be replaced by the manufacturer, its service agent, or similar qualified persons in order to avoid a hazard. 10 Dispose
  • Insignia NS-BC1ZSS9 | User Guide - Page 6
    NS-BC1ZSS9 Features • 165-can capacity • Temperature range from 34° to 50°F (1° to 10°C) • cooler • Handle • Door reversal accessories (hex wrench, left hinge, & spare plastic plugs) • User Guide Components Temperature control panel Glass door Wire shelves Air vent 6 www.insigniaproducts.com
  • Insignia NS-BC1ZSS9 | User Guide - Page 7
    . Finding a suitable location • This cooler is designed to be built into your cabinets. Place it on a floor, countertop, or cabinet that is strong enough to support the cooler when it is fully loaded. www.insigniaproducts.com 7
  • Insignia NS-BC1ZSS9 | User Guide - Page 8
    NS-BC1ZSS9 • If the cooler is not properly ventilated, the compressor will use more power. not leveled during installation, the door may not close or seal properly, causing cooling, frost, or moisture problems. • To level your cooler, you may either turn the feet clockwise to raise the cooler or
  • Insignia NS-BC1ZSS9 | User Guide - Page 9
    165-Can Beverage Cooler Installing the handle 1 Align the handle with the two bolts on the glass door. Handle 2 Secure the handle with the 3 mm hex wrench (included), making sure that the screw holes on the handle are facing downward. Screw hole facing downward Hex wrench Reversing the door To
  • Insignia NS-BC1ZSS9 | User Guide - Page 10
    NS-BC1ZSS9 2 Remove the upper hinge bolt (1) and lift the door off the cooler. 3 To reverse the cooler's hinges: A Remove the three screws (2) securing the upper hinge (3)
  • Insignia NS-BC1ZSS9 | User Guide - Page 11
    165-Can Beverage Cooler B Install the upper hinge from the included accessories bag (3) to the opposite side, then insert the plastic caps (4) into the old screw holes. Note: The left upper hinge and right upper hinge are not the same. Make sure that you install the extra hinge that was included
  • Insignia NS-BC1ZSS9 | User Guide - Page 12
    NS-BC1ZSS9 D Remove the two screws (8) securing the door support (9), the three screws (10) securing the lower hinge (11), and the lower hinge shaft (12). E Reinstall the door support (9) and lower hinge (11) on the opposite sides, then place the lower hinge shaft (12) back into the lower hinge. 12
  • Insignia NS-BC1ZSS9 | User Guide - Page 13
    165-Can Beverage Cooler F Secure the air cover (7) to the refrigerator with the screws (5). 4 To prepare the cooler door: A Remove the upper sleeve (2) from the top of the door. www.insigniaproducts.com 13
  • Insignia NS-BC1ZSS9 | User Guide - Page 14
    NS-BC1ZSS9 B Remove the light switch block (4) and door stopper (5) from the bottom of the door by removing the corresponding screws (3) and sleeve (6). C Rotate the door 180°. D Insert the upper sleeve (2) into the top of the door. 14 www.insigniaproducts.com
  • Insignia NS-BC1ZSS9 | User Guide - Page 15
    165-Can Beverage Cooler E Secure the light switch block (4) and door stopper (5) to the bottom of the door with their corresponding screws (3) and sleeve (6). Note: Make sure that these parts are installed on the side WITHOUT the handle. 5 Place the door on the cooler's lower hinge shaft, then
  • Insignia NS-BC1ZSS9 | User Guide - Page 16
    NS-BC1ZSS9 Connecting to power • Plug the cooler into a dedicated, properly installed ) wall outlet to minimize the possibility of electric shock hazard from this cooler. • To prolong the service life of the compressor, wait for at least five minutes before restarting the cooler after a power failure
  • Insignia NS-BC1ZSS9 | User Guide - Page 17
    165-Can Beverage Cooler Using your beverage cooler Turning on your cooler • Plug your cooler in to turn it on for the first time. The display lights up for three seconds, the cooler beeps, then the compressor starts working. OR If in standby mode, press and hold (power) for five seconds to turn
  • Insignia NS-BC1ZSS9 | User Guide - Page 18
    NS-BC1ZSS9 Arranging your beverages In order to maintain good air circulation in the cooler, do not let the beverages touch the back of the cooler. Due
  • Insignia NS-BC1ZSS9 | User Guide - Page 19
    165-Can Beverage Cooler Maintaining your beverage cooler Your cooler is designed for year-round use with only minimal cleaning and maintenance. Before using your cooler for the first time, wipe the cabinet with a mild detergent and warm water, then wipe dry with a dry cloth. Do this periodically to
  • Insignia NS-BC1ZSS9 | User Guide - Page 20
    NS-BC1ZSS9 Moving your beverage cooler appliance is sufficiently ventilated, with adequate air circulation behind it. Troubleshooting Error codes If a fault is detected, the display shows one contact your local dealer or service center. Do not try to repair the cooler yourself. 20 www
  • Insignia NS-BC1ZSS9 | User Guide - Page 21
    165-Can Beverage Cooler Problems and solutions PROBLEM SOLUTION The cooler does not operate. The cooler door does not close completely. The cooler is not cold enough. The cooler makes unusual noises or
  • Insignia NS-BC1ZSS9 | User Guide - Page 22
    NS-BC1ZSS9 ONE-YEAR LIMITED WARRANTY Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia packaging. To obtain warranty service, in the United States call does not cover: • Customer instruction/education • Installation • Set up
  • Insignia NS-BC1ZSS9 | User Guide - Page 23
    165-Can Beverage Cooler • Connection to an incorrect voltage or power supply • Attempted repair by any person not authorized by Insignia to service the Product • Products sold "as is" or "with all faults" • Consumables, including but not limited to batteries (i.e. AA, AAA, C, etc.) • Products where
  • Insignia NS-BC1ZSS9 | User Guide - Page 24
    www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2018 Best Buy.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

Before using your new product, please read these instructions to prevent any damage.
USER GUIDE
165-Can
Beverage Cooler
NS-BC1ZSS9