Insignia NS-BC1ZSS9 User Guide - Page 16
Connecting to power
View all Insignia NS-BC1ZSS9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
NS-BC1ZSS9 Connecting to power • Plug the cooler into a dedicated, properly installed grounded wall outlet. This appliance should be operated on a separate electrical circuit from other operating appliances. CAUTION: This unit is not designed to be installed in an RV or used with an inverter. • Plug in and run your cooler for three to four hours before making any temperature adjustments and before adding beverages. This allows your cooler to reach a stable temperature. Notes: • Check your local power source. This cooler requires a 115V, 60 Hz power supply. • Use a receptacle that accepts the grounding prong. The power cord is equipped with a 3-prong (grounding) plug which plugs into a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this cooler. • To prolong the service life of the compressor, wait for at least five minutes before restarting the cooler after a power failure. • Do not use an extension cord with this cooler. If the power cord is too short, have a qualified electrician install an outlet near the cooler. Use of an extension cord can negatively affect the cooler's performance. • Do not connect your cooler to an electronic energy-saving plug and converter that converts DC into AC (such as a solar energy system). 16 www.insigniaproducts.com