Insignia NS-BRDVD3CA Firmware Installation Guide (English) - Page 2
Do Not Turn The Power Off During The Update
View all Insignia NS-BRDVD3CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
5. Using your remote control make sure the "Ok" button is highlighted and press enter on the remote. The software update will then begin Note: DO NOT TURN THE POWER OFF DURING THE UPDATE Note: During the software update, a timer will count down the approximate number of minutes and seconds remaining for the update. 6. Once the update has completed, a screen similar to the one shown below will appear: 7. Remove the USB flash drive (stick) from the player. 8. The player will restart after removing the USB flash drive (stick). Note: It is recommended that you erase/delete the update file from the USB flash drive using your computer prior to using the USB flash drive again. Note: If you experience any issues while performing this upgrade, call Insignia Customer Support at (877) 467‐7289 for assistance or to request a free update CD.