Insignia NS-CAHBTEBNC-S Quick Setup Guide - Page 1

QUICK SETUP GUIDE Bluetooth Noise-Canceling Headphones NS-CAHBTEBNC-S PACKAGE CONTENTS • Bluetooth Noise-Canceling Headphones • Two additional pairs of earbuds in small and large sizes • USB charging cable • 3.5 mm-to-Micro-USB audio cable • Audio cable • Quick Setup Guide FIND YOUR USER GUIDE ONLINE! Go to www.insigniaproducts.com, enter your model in the search box, then press ENTER. Next to Features, click Support & Downloads, then next to User Guide, click the language you want. FEATURES • Noise cancelling • Ambient noise monitoring • Volume control • Listen to music or talk on the phone wirelessly • Music playback: 8 hours • Echo cancellation and noise suppression • Voice prompts and easy pairing • High quality sound Before using your new product, please read these instructions to prevent any damage. # DESCRIPTION 1 Indicator LED FUNCTION Shows current Bluetooth status of the headphones. 2 Micro USB port Plug the micro USB connector into this port to charge your headphones. 3 Volume Up / Next Track Press to increase the volume. Press and hold for one second to skip to the next track. 4 (Power/Talk / Play / Pause / Pairing) button Press to turn on your stereo headphones. If you receive a phone call, press to talk. Press to pair your headphones with a Bluetooth enabled device. 5 Volume Down / Press to decrease the volume. Previous Track Press and hold for one second to skip to the previous track. 6 Retraction buttons Press to retract the cord. 7 Earbuds Allow the headphones to fit comfortably in your ear. 8 Microphone Allows you to talk on the telephone. 9 Indicator LED Shows current noise cancelling status of the headphones. 10 Noise cancelling Cancel low frequency noise. 11 Monitor button Press to start ambient noise monitoring. 12 Monitor microphone Pick up the ambient low frequency noise. BLUETOOTH AND NOISE CANCELLING BASIC INDICATION ACTION Power on Power off Pairing mode Volume Up/Down OPERATION Press and hold more than two seconds Press and hold more than three seconds Press and hold more than four seconds in power off mode Press and release / button LED INDICATION Blue LED lights for 1.5 seconds Red LED lights for 1.5 seconds Blue and red LED blinking alternately Incoming call Answer call Reject call Redial Reset device list Noise cancelling on Noise cancelling off Monitor on Monitor off Press and release when a call is incoming Press and hold when a call is incoming Double press Long press more than five seconds in power off mode Slide the noise cancelling switch to the noise cancelling on position Slide the noise cancelling switch to the noise cancelling off position Press and release to enter the monitor mode Press and release to exit the monitor mode Blue LED blinks three times every five seconds when a call is received Red LED flashes 10 times Green LED light on Green LED turn down Green LED flashes one time per three seconds Green LED light on SOUND "power on" "power off" Two short beeps Two high beeps for maximum volume Ring tone One long beep Two long beeps Two short beeps CHARGING YOUR STEREO HEADPHONES • When the red indicator LED blinks three times every minute and the voice prompt says"battery low", the battery is low. To charge the battery, plug the charging cable into your computer and into the micro USB port on your headphones. The red LED turns on to indicate that the battery is charging and turns off when fully charged. USING WITH THE 3.5 MM AUDIO CABLE You can use your headset with non-Bluetooth enabled devices or on airplanes (in which the use of Bluetooth may be restricted) by taking advantage of the headset's audio jack. • Connect the micro USB end of the included audio cable to the headset's audio jack and the 3.5 mm end to the audio device's headphone jack. Notes: • Corded operation does not require battery power for music listening. The microphone and the FullSound digital sound enhancement will not work via the audio cable. • Finish your call before connecting the audio jack, as this will switch off battery power and cut an ongoing call. USING YOUR STEREO HEADPHONES Turning your stereo headphones on and off 1 Place the headphones around your neck. 2 Press and hold more than two seconds. The LED blinks blue (when turned on) or red (when turned off) and the voice prompt says"Power on"or "Power off". PAIRING YOUR STEREO HEADPHONES Notes: • Range is 33 feet (10 meters) • Prompts you by saying"Your device is connected,"when connected • Supports easy pairing • Supports a battery indicator icon on an iOS device Pairing with a cell phone or MP3 player 1 With your stereo headphones turned off, press and hold for four seconds. The blue and red LEDs blink alternately. 2 On your phone or MP3 player, select INSIGNIA NS-CAHBTEBNC-S from the list of discovered devices, then enter the password 0000 (four zeros) (if required) to pair your headphones. For more information on pairing Bluetooth devices to your cell phone or MP3 player, see the device's documentation. Note: After the headphones have been successfully paired with the cell phone or MP3 player, the headphones will automatically reconnect to the phone or MP3 player.