Insignia NS-CF26BK9 User Guide - Page 8
Finding a suitable location, Providing the correct power source, Leveling your refrigerator
View all Insignia NS-CF26BK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
1.7 or 2.6 Cu. Ft. Compact Refrigerator Finding a suitable location • Allow 5 inches (12.7 cm) of space between the back and sides of your refrigerator and any surrounding walls. This allows proper air ventilation. • Adjust the feet to keep your refrigerator level. • If you locate your refrigerator next to a wall, allow sufficient space on the hinge side for the door to swing open. • Position your refrigerator away from direct sunlight and sources of heat, such as a stove, heater, or radiator. Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extremely cold temperatures may also prevent your refrigerator from performing correctly. Providing the correct power source Check your local power source. Your refrigerator requires a 115V, 60Hz power supply. WARNINGS: Make sure that: • The power outlet accepts a 3-prong grounding plug. The third prong on the power cord plug grounds your refrigerator to minimize the possibility of electric shock. Do not modify the power plug. • You do NOT plug anything else into the same power outlet as your refrigerator. You may overload the circuit which can cause a fire. • You do NOT use an extension cord. If your refrigerator is too far from the power outlet, move your refrigerator or have a electrician install a plug closer to your refrigerator. • The power outlet cannot be turned off with a switch or pull string. Using a 3-prong plug and outlet Using a grounding adapter 3-prong outlet Grounding lead Screw Outlet 3-prong plug Outlet cover Grounding adapter Outlet cover Leveling your refrigerator • Leveling your refrigerator is important. If you do not level your refrigerator during installation, the doors may not close or seal correctly which can cause cooling, frost, or moisture problems. • To level your refrigerator, rotate the leveling feet clockwise (to raise) your refrigerator or counter-clockwise (to lower). Note: To make it easier to adjust the feet, have someone push against the top of your refrigerator to tilt it slightly. Reversing the refrigerator door CAUTIONS: • To avoid serious injury or death from electrical shock, unplug your refrigerator before you reverse the door. • To remove the door, you have to tilt your refrigerator backwards. To avoid personal injury and property damage, get another person to tilt your refrigerator while you reverse the door. You can also lean your refrigerator against something solid, like a chair, just below the top panel. • DO NOT lay your refrigerator flat because you may damage the coolant system. You will need the following tools to reverse the refrigerator door: 10 mm nut driver Phillips screwdriver 1 Unplug your refrigerator, then remove all contents. 2 Adjust the leveling feet to their highest positions. 3 Remove the screw holding the top hinge cover to the top of your refrigerator, then remove the cover. 4 Remove the screws and pin holding the top hinge to your refrigerator, then remove the hinge. 8 www.insigniaproducts.com