Insignia NS-CLBT02 User Manual (English) - Page 9

NS-CLBT02 Digital Clock Radio with Bluetooth Using your radio Setting the time Note "AM" or "PM" appears on the LCD to the right of the time. When you set the time, make sure that the "AM" or "PM" displays correctly. To set the time: 1 Press Sleep (sleep) for about two seconds until the hour digits blink on the LCD. 2 Press or to increase the hour or press or to decrease the hour. 3 Press Sleep (sleep) again. The minutes digits blink on the LCD. 4 Press or to increase the minutes or press or to decrease the minutes. 5 Press Sleep (sleep) again to save the time setting and exit time setting mode. Setting the alarm sound Your radio has two alarms and can play the buzzer or the radio for the alarm sound. You can use the same alarm sound for both alarms or set one alarm to use the buzzer and the other alarm to use the radio. To set the alarm sound: 1 Press 1 (Alarm 1) or 2 (Alarm 2). The 1 or 2 icon blinks on the LCD. 2 To use the radio as the alarm sound, press 1 (Alarm 1) or 2 (Alarm 2) once. The 1 Radio or 2 Radio icon blinks on the LCD and the alarm sound is set to the radio. Wait three seconds to save the setting and exit alarm sound setting mode. OR To use the buzzer as the alarm sound, press 1 (Alarm 1) or 2 (Alarm 2) twice. The 1 Buzzer or 2 Buzzer icon blinks on the LCD and the alarm sound is set to the buzzer. Wait three seconds to save the setting and exit alarm sound setting mode. 3 To completely turn off the alarm, press 1 (Alarm 1) or 2 (Alarm 2) repeatedly until the 1 or 2 icon disappears from the LCD. www.insigniaproducts.com 9