Insignia NS-CMM2SC Quick Setup Guide - Page 2
One-year Limited Warranty, Contact Insignia
View all Insignia NS-CMM2SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Attaching to a car window or dashboard 1 Clean the window or dashboard with a clean cloth. 2 Remove the clear film from the suction cup. 4 Remove the protective film from the metal plate, then press the adhesive side of the plate to the back of your GPS or mobile device. 6 Loosen the adjustment knob, adjust the viewing angle, then fully tighten the knob. Removing your GPS Hold your GPS or mobile device securely, then pull it away from your mount. The metal plate stays attached to your GPS or mobile device. 3 Release the suction lever on your magnetic mount, position the suction cup in the window or dashboard location you want, then press the lever down. Metal plate 5 Press the other side of the metal plate to the magnetic mount head. Adjustment knob CAUTION: Always loosen the adjustment knob before changing the viewing angle. 7 To remove the mount, push the suction lever, then pull the suction cup tab. Suction cup tab ONE-YEAR LIMITED WARRANTY Visit www.insigniaproducts.com for details. CONTACT INSIGNIA For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2019 Best Buy. All rights reserved. Suction lever The mount adheres to the window or dashboard. If the cup leaves a residue, clean the window or dashboard with water or window cleaner and a clean cloth. CAUTION: Do not adjust your mount while driving. V1 ENGLISH 19-0347