Insignia NS-CSPGASP-B Quick Setup Guide - Page 1

PROBLEM

My device

cannot connect

to Wi-Fi

The app cannot

find the device

SOLUTION

• Check the Wi-Fi settings on your device to

make sure that Wi-Fi is turned on.

• Make sure that you selected the right

network and entered the correct

password.

• Make sure that your router/modem is on

and that you are within range of it.

• Turn your device off, then back on.

• Reset your router/modem.

• Make sure that your device has power and

is on.

• Make sure that your network is working

properly.

• Make sure that your router/modem is on

and that you are within range of it.

• Make sure that the mobile phone has

location setting enabled.

QUICK SETUP GUIDE

Insignia Voice™

Speaker

NS±CSPGASP±B / NS±CSPGASP±BC /

NS±CSPGASP±G

SPECIFICATIONS

• Power output: 8W

• Product dimensions: 3.7 × 3.7 × 5.9 in.

(96 × 96 × 151.6 mm)

• Net weight: 19.4 oz. (550 g)

TROUBLESHOOTING

Note

: If you try the solutions suggested above and still have

connection or operation issues, reset your speaker by pressing the

Microphone button for 12 seconds.

LEGAL NOTICES

Warning

: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

Note

: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

RF Exposure Statement

To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be

installed and operated with a minimum distance of 20 centimeters between the radiator

and your body.

Industry Canada Compliance

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s).

SETTING UP YOUR SPEAKER

1

Place your speaker in a convenient place.

2

Plug the power cable into the speaker and the adapter

into a wall socket. The speaker powers up.

3

Make sure that your Wi-Fi,

Location Services (GPS)

, and

Bluetooth

are turned on/enabled on your device.

4

Download the Google Home app on a phone or tablet to

set up your speaker.

5

To use the Voice Assistant, you must sign in to your

Google Account.

For more help, visit g.co/home/setup.

Google Voice Assistant

Just start by saying “Ok Google”, then ask it questions or tell

it to do things.

Use these anytime:

•

“Play some music”

•

“Turn up the volume”

•

“What‘s the weather like in Minneapolis?”

Google Chromecast Built-in

Follow the three steps below to enjoy this feature:

1

Connect a phone or tablet to the same Wi-Fi network as

your speaker using the Google Home App.

2

Cast podcasts, music, and more from 100+

Chromecast-enabled apps.

3

Tap the

Cast

button in a Chromecast-enabled app to play

music on your speaker.

Bluetooth Set-up

This speaker is equipped with Bluetooth to allow wireless

playback from any Bluetooth-enabled phone or tablet.

1

Press and hold

-

and

+

buttons for four seconds to enter

Bluetooth pairing mode.

2

Click “NS-CSPGASP” or the device name you entered

during Google Home App setup on your device to pair

with the speaker.

3

After the speaker and your device are paired, you can

stream music from your device to the speaker.

FEATURES

•

Play and control music from your favorite services

•

Set alarms, add items to your shopping list, learn about

your commute, and more

•

Tap into the power of Google to get real-time answers to

your questions

•

Link compatible smart-home products to turn off lights or

enjoy entertainment on your TV

•

Wirelessly stream your music from any Bluetooth-enabled

device to your speaker

•

Display to show time, alarm, temperature, volume, and

mode

Control panel

Front

IMPORTANT SAFETY INSTRUCTIONS

1

Read these instructions

2

Keep these instructions

3

Heed all warnings

4

Follow all instructions

5

Do not use this apparatus near water, for example, in a wet basement or near a

swimming pool.

6

Clean only with a dry cloth.

7

Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8

Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatuses (including amplifiers) that produce heat.

9

Do not defeat the safety purpose of the polarized or grounding plug. A polarized

plug has two blades with one wider than the other. A grounding plug has two

blades and a third grounding prong. The wide blade or the third prong is provided

for your safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10

Protect the power cord from being walked on or pinched, particularly at the plugs,

outlets, and at the point where they exit from the apparatus.

11

Only use attachments/accessories specified by the manufacturer.

12

Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus.

When a cart or rack is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

13

Unplug the apparatus during lightning storms or when

unused for long periods of time.

14

Refer all servicing to qualified personnel. Servicing is

required when the apparatus has been damaged in any way. Examples of

service-requiring damages include power supply cord or plug damage, liquids

being spilled or objects falling onto the apparatus, apparatus not operating

normally, and/or apparatus being dropped.

15

Do not install this equipment in a confined space, such as a book case or similar

unit, and make sure that it is well ventilated. The ventilation should not be impeded

by covering the ventilation openings with items, such as newspaper, table-cloths,

or curtains.

16

WARNING:

To reduce the risk of fire or electric shock, do not expose this apparatus

to rain or moisture. The apparatus shall not be exposed to dripping or splashing and

objects filled with liquids, such as vases, shall not be placed on apparatus.

17

WARNING:

The power adapter is used as a disconnect device. The disconnect

device shall remain readily operable.

18

The equipment shall be used at a maximum of 95° F (35° C) ambient temperature.

19

WARNING:

Please refer to the information on the exterior bottom enclosure for

electrical and safety information before installing or operating the apparatus.

PROBLEM

No power

No sound or low

volume in

Bluetooth Mode

Cannot establish

Bluetooth

connection

My Bluetooth

device keeps

unpairing

“NS-CSPGASP”

does not appear

on my Bluetooth

device

SOLUTION

• Make sure that your speaker is plugged in

and turned on.

• Make sure that your Bluetooth device is

turned on, Bluetooth is turned on, and

NS-CSPGASP

or the device name you

entered during Google Home App setup

is selected.

• Turn up the volume on your speaker.

• Turn up the volume on your Bluetooth

device.


not muted.

• Make sure that your speaker is not paired

to another Bluetooth device.


not paired to another Bluetooth device.

• Shorten the distance between your

speaker and your Bluetooth device.

• Turn your devices off, then on. Re-pair

your speaker and your Bluetooth device.

• Make sure that your speaker is not paired

to another Bluetooth device.

•

Make sure that your speaker and Bluetooth

device are both in pairing mode.

• Make sure that your Bluetooth device

supports Bluetooth v4.0 and below.


not connected to any other device.

• Make sure that you have selected

NS-CSPGASP

or the device name you

entered during Google Home App setup.





• Put your speaker into pairing mode, then

refresh your list of Bluetooth devices. For

more information, see the documentation

that came with your Bluetooth device.

Before using your new product, please read these instructions to prevent any damage.

PACKAGE CONTENTS

•

Speaker

•

Power adapter

•

Quick Setup Guide

V2 ENGLISH 17-0645

Volume + /-

buttons

Play/Pause

button

Lights when

active

Time

and

alarm

Temperature

Microphone

on/off

Power/Microphone

status light

USB charge out

5V/1A

Power Input

12V/2.5A

FEATURE

Power Input

+/-

Microphone

on/off/

Factory reset

USB charge out

Hold

and

press

-

Hold

and

press

+

Press

-

and

+

DESCRIPTION

Plug in to turn the speaker on.

Press to increase or decrease the volume.

• Press for Play/Pause.

• Press and hold

for Hot Word. This is the

same as “Ok Google”

• To power on/off, plug/unplug the cable from

the speaker or the adapter from the wall

socket.

• Short press (~ 1 second) to turn microphone

on or off.

• Press for 12 seconds to reset the product.

Connect to your device to supply 5V/1A

charging.

Decrease the display brightness with each press

of the - button.

Increase the display brightness with each press

of the + button.

• Press and hold for four seconds to enter

Bluetooth pairing mode.

LED

Backside white LED blinks slowly

then turns on

• Proximity lights up the topside

LEDs

• Touching will keep the lights on


LEDs


Topside orange LEDs solid when

microphone is muted.


LEDs



LEDs



LEDs


Back

Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables

aux appareils radio exempts de licence. L'exploitation est autorisée aux deux

conditions suivantes :

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter

tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance

of 20 centimeters between the radiator and your body.

Ce matériel est conforme aux limites d'exposition aux rayonnements rf de ic énoncés dans

un autre environnement. ce matériel doit être installé et exploité à une distance minimale

de 20 cm entre le radiateur et votre corps.

- This Class B digital apparatus complies with Canadian ICES-003.

- Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.

ONE±YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

1-877-467-4289 (U.S. and Canada)

01-800-926-3000 (Mexico)

www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated companies

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richfield, MN 55423 U.S.A.

©2017 Best Buy. All rights reserved.

Made in China

FIND YOUR

USER GUIDE

ONLINE!

Go to www.insigniaproducts.com, enter

NS-CSPGASP

in the search box, then press

ENTER

.

Next to

Features

, click

Support & Downloads

, then

next to

User Guide

, click the language you want.

Insignia NS-CSPGASP-B Quick Setup Guide - Page 1

Insignia NS-CSPGASP-B Manual

Page 1 highlights