Insignia NS-CZ18XWH7 User Guide - Page 13

WiFi Connected 13.8 Cu.Ft. Upright Freezer Switching between Fahrenheit and Celsius Using the Control Panel 1 Press and hold Lock for three seconds to unlock the control panel. 2 Press and hold +/- for three seconds to switch settings. Using the App • Tap Edit, then tap the slider next to Temperature Unit to switch settings. Connecting your freezer to WiFi (optional) Download the Insignia Connect app from the Apple App Store or Google Play Store to use additional features, such as open-door and temperature alerts. App download is optional - your freezer works normally without it! 1 Make sure your mobile device is connected to your preferred Wi-Fi network. 2 Download and open the free Insignia Connect Device app from the App Store or Google Play. (Apple: iOS 9 or later, Android: 6.0.1 Marshmallow or later). 3 Log in or sign up for a Best Buy or Insignia Connect Device account. 4 On your freezer, press and hold Lock to unlock the control panel. 5 Press and hold - and Lock at the same time until you hear a beep and see "0" on the control panel. 6 Press + until "AP" is displayed. 7 In the Insignia Device app, tap Set Up Device, then follow the on-screen directions to complete setup. Notes • The control panel will display the temperature after 10 seconds, but WiFi pairing mode remains active. • You may need to repeat steps 4-6 to put the freezer back into AP mode, if the app cannot find your freezer. • Your freezer uses the 2.4 GHz WiFi spectrum. If your router provides both 2.4 GHz and 5 GHz bands, select the network corresponding with the 2.4 GHz band. www.insigniaproducts.com 13