Insignia NS-DD10PDVD19 User Guide - Page 18

NS-DD10PDVD19 Using your DVD player Turning your player on 1 Slide the ON/OFF switch on the side of your player to the ON position. 2 After use, slide the ON/OFF switch to the OFF position. Playing a DVD or Audio CD Notes: • Most DVDs and your players have region codes that help control illegal distribution of DVDs. The region code for your player is 1. You can only play DVDs with a region code of 1 or ALL. The region code for a DVD is usually printed on the DVD or the DVD packaging. • This User Guide explains the basic instructions for operating your players. Depending on how a DVD is produced, the DVD may have specific or limited playback features and may not respond to all your commands. THIS IS NOT A DEFECT. Refer to the instructions accompanying a specific DVD for more information about the options available on that DVD. 1 Make sure that your player is connected to power. 2 Slide the ON/OFF switch to the ON position. 3 Slide the OPEN switch. The front and back of your player separate to give access to the disc tray. 4 Place a disc, label side up, in the disc tray, then press the player front and back together until you hear a click. The disc starts playing automatically. Controlling DVD or Audio CD playback Note: If using the controls on your DVD player, press and hold the buttons to use the VOL-, VOL+, SETUP, (play/pause), and (stop) functions. • Press (stop) to stop playback. If you press this button once, then press , playback resumes playing where it stopped. If you press this button twice, then press , playback begins at the beginning of the disc. • Press (play/pause) to pause playback. Press this button again to resume playback. • Press (skip forward) or (skip back) to go to the next or previous chapter or track. • Press (forward) or (reverse) to fast-forward or fast-reverse on a disc. Each time you press this button, the speed changes (2x to 4x to 8x to 16x to 32x to normal playback). You can also press to exit fast-forward mode. 18 www.insigniaproducts.com