Insignia NS-DSC10A User Manual (English) - Page 22

Insignia NS-DSC7B-09, NS-DSC7P-09, or NS-DSC7S-09 7 Megapixel Digital Camera 4 Press or to select Single, then press SET to confirm. To set up the DPOF for all photos, select All in this step. To reset all DPOF settings to initial default, select Reset in this step. 5 Press or to select the photo you want to print. 6 Press or to set the number of copies you want (0~30). To cancel DPOF for this photo, select 0. 7 Press the SCN button to turn on the date stamp for the current photo. Press it again to turn off the date stamp. 8 Repeat Steps 5 to 7 for additional photos you want to print. 9 Press SET or the MENU button to apply the DPOF settings. Choosing a startup image To choose the startup image: 1 Press Power button to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. Making connections Connecting the camera to a TV Use this connection to display recorded images on a television with the supplied AV cable. To connect the camera to a TV: 1 Set the TV Out setting to match the TV system that you are using (See "Setup menu" on page 11). 2 Turn off the camera and the TV. 3 Connect the camera to the TV set using the supplied AV cable. 3 Press the MENU button, then press , , , or to select S.Image and press SET. 4 Press or to select the photo you want to use, then press SET to confirm. "Completed" appears on the LCD. 5 Press the MENU button, then press , , , or . to select the Setup menu icon . 6 Press or to select S.Image , then press or SET. 7 Press or to select the option you want, then press SET to confirm. Options include: • Off-Disable startup image. • System-Use the camera default image. • My image-Use the image that you specified in Step 5. 8 Press the MENU button to close the menu. Note The startup image is stored in internal memory, so it is not deleted, even if the original image is deleted or the memory formatted. 4 Set the TV input signal to Video In. Refer to the documentation included with your TV for more information. Everything that would normally appear on the camera's LCD, such as photo and video clip playback, slide shows, and image or video capture, appears on the TV. Connecting the camera to a computer To connect the camera to a computer: 1 Connect the camera to the computer using the supplied USB cable. The LCD monitor turns off when the connection is successful. 2 Click My Computer or Windows Explorer on your computer. A new "Removable Disk" appears in the drive list. 22 www.insignia-products.com