Insignia NS-DSC10SL User Manual (English) - Page 11
Getting started
View all Insignia NS-DSC10SL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Insignia 10 Megapixel Camera 3 Insert an SD or SDHC card into the card slot with the card's metal contacts facing the front of the camera. 4 Push the SD or SDHC card into the slot until it clicks into place. LOCK Recording images and videos Before you record an image or video, you might want to set the date and time and select the language used on the display. See "Setting the date and time" on page 19 and "Selecting the display language" on page 19. To record an image: 1 Turn on your camera. 2 Move the mode). (mode slider) to (Photo 3 Frame the image using the focus bracket on the display. 5 Close the compartment cover, then slide the lock into the locked position. To remove the SD or SDHC card: 1 Make sure that your camera is turned off. 2 Open the battery/SD/SDHC card compartment. 3 Gently push in on the card until it pops out. 4 Carefully, pull out the card and close the compartment. Getting started Turning your camera on or off To turn your camera on or off: • Press and hold POWER until the startup image appears. A startup up sound plays (if sounds are turned on) and the zoom lens extends. • Press POWER again to turn off your camera. Note The zoom lens does not extend if the mode slider is set to Playback mode when the camera is turned on. 4 Half-press the shutter button. Your camera automatically adjusts the focus and exposure. When your camera is ready to take the photo, the focus bracket turns green, and the aperture value, shutter speed, and ISO setting are displayed. 5 Fully press the shutter button to capture the image. Note If the (shake warning) appears when you are taking an image, hold the camera steady, with your arms at your side, or use a tripod to stabilize your camera in order to prevent blurred images. To record a video: 1 Turn on your camera. 2 Move the mode). (mode slider) to (Video 3 Focus your camera on the subject that you want to record. 4 Press the shutter button to start recording. 5 Use the zoom control subject. to zoom in or out on a 6 To pause recording, press . To continue recording, press . 7 To stop recording, press the shutter button. Note • • • When the maximum capacity for a single video has been reached, press the shutter button again to continue recording. The camera will automatically stop recording when the available memory is full. When recording videos, audio recording mutes during zoom operation. This prevents the sound of the zoom lens from being recorded in your videos. www.insigniaproducts.com 7