Insignia NS-DSC1110A User Manual (English) - Page 20

Setting the metering function This feature controls exposure metering in recording still images. Note The metering function can only be set when Simple mode is set to Off. To set the metering function: 1 Press MODE to switch to Photo mode. 2 Press MENU to open the Record menu. NS-DSC1110A 10 Megapixel Camera An icon that corresponds to the metering mode selected will appear on the left side of the LCD. Metering icon 3 Press / or / to highlight Metering, then press OK/DISP to open the submenu. 5 Press MENU again to close the menu. Turning burst mode on or off Burst mode allows for continuous shooting of photos. Burst mode is not available in Video mode. Note The burst mode setting can only be adjusted when Simple mode is set to Off. To turn burst mode on or off: 1 Press MODE to switch to Photo mode. 2 Press MENU to open the Record menu. 4 Press / or / to select the setting you want, then press OK/DISP. You can select: • Center-Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center. • Multi-Divides the image into several zones and measures the light in each zone for a balanced exposure reading. Your camera determines shooting conditions according to the measured lighting pattern, and makes exposure settings accordingly. • Spot-Locks the spot metering frame to the center of the LCD. 3 Press / or / to highlight Burst Mode, then press OK/DISP to open the submenu. 4 Press / or / to select On or Off, then press OK/DISP. 16 www.insigniaproducts.com