Insignia NS-DVDVCR User Manual (English) - Page 20

The DVD/VCR does not start playback No disc or tape is inserted An unplayable disc is inserted Insert a disc or tape (make sure that the disc or tape indicator in the display window is lit) Insert a playable disc. (Check the disc type and Regional code.) The disc is placed Place the disc with the upside down playback side down The disc is not placed within the guide Place the disc on the disc tray correctly inside the guide The disc is dirty Clean the disc The Rating level is Cancel the Rating function or set change the rating level Video tape cannot be inserted The cassette compartment may not be empty Eject the tape The remote There is an obstacle Remove the obstacle control does in the path of the not work remote control and correctly your DVD/VCR The batteries in the Replace the batteries with new remote control are ones exhausted The remote control Point the remote control at the is not pointed at the remote sensor of the DVD/VCR remote sensor of the DVD/VCR The remote control Operate the remote control is too far from the within 23ft (7m) DVD/VCR This remote control When using a VCR, first press uses the same the VCR button. When using a buttons for VCR and DVD, first press the DVD DVD functions, such button as PLAY The The camcorder is off Turn camcorder on and operate camcorder it correctly image is not shown The The DVD/VCR's camcorder source is set image is not incorrectly shown on TV screen Use INPUT to select the correct input channel (LINE1 or LINE2) Timer The DVD/VCR clock Set the clock to the correct recording is is not set to the time not possible correct time The timer has been Reprogram the timer programmed incorrectly The TIMER Record indicator light does not appear after programming the timer Reprogram the timer and turn off the DVD/VCR to enable the timer Cannot The remaining blank Use another tape record or did space on the tape is not record insufficient successfully The source you are You cannot record the source trying to record is copy-protected Stereo Audio TV is not Record or Stereo-compatible Playback is not present Broadcast program is not in stereo format DVD/VCR LINE Out jacks are not connected to TV A/V In jacks DVD/VCR Audio/Video Out is not selected for viewing at the TV No solution No solution Make A/V connections. Stereo is available only on A/V output from DVD/VCR. Select AUX or A/V source as TV input Maintaining Handling and cleaning the DVD/VCR Shipping the DVD/VCR Please save the original shipping carton and packing materials. If you need to ship the DVD/VCR, for maximum protection, re-pack the it as it was originally packed at the factory. Keeping the exterior surfaces clean • Do not use volatile liquids such as insecticide spray near the DVD/VCR. • Do not leave rubber or plastic products in contact with the DVD/VCR for a long period of time because they can leave marks on the surface. Cleaning the case • To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. • Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the player. Maintaining the DVD/VCR This DVD/VCR is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of use. For details, please contact your nearest authorized service center. Care and handling of discs Handling discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. Storing discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. 20 www.insignia-products.com