Insignia NS-DXFL2C User Manual (English) - Page 15
Setting the flash's custom functions through the camera, Over-Temperature Protection, Error codes
View all Insignia NS-DXFL2C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
NS-DXFL2C External TTL Flash for Canon™ Setting the flash's custom functions through the camera You can set the flash's custom functions through your camera. To do this, open the camera's menu and select Flash control, then open the External flash C.Fn setting lists. The custom functions can be set as follows: 1. C.Fn.01 Auto power off • 0-The auto power off function takes effect and the flash will enter sleep mode after a period of idle operation. • 1-The auto power off function is off and the flash will not enter sleep mode after a period of idle operation 2. C.Fn.10 Slave auto power off timer • 0-The slave auto power off time will be set as 60 minutes. • 1-The slave auto power off time will be set as 30 minutes. Over-Temperature Protection • To avoid overheating and damaging the flash head, allow the camera to rest after 20 continuous flashes. • If you fire too many flashes, the inner over-temperature protection function may be activated and make the recycling time about 10 to 15 seconds. If this occurs, allow a rest time of about 10 minutes, and the flash unit returns to normal. Error codes The flash has a built-in protection mechanism in case of a failure. If the system detects a problem the power level indicator blinks: Blinking power level indicator 1/64 1/32 1/16 Meaning A failure occurred in the recharging system and the flash cannot fire. Turn the flash power switch OFF, then ON again. If the problem persists, it will require service. The system is too hot. Allow a rest time of 10 minutes. The flash tube voltage is too high. Service is required. www.insigniaproducts.com 15