Insignia NS-EWF01-2 Quick Setup Guide - Page 1
Insignia NS-EWF01-2 Manual
View all Insignia NS-EWF01-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Quick Setup Guide Refrigerator Filter | NS-MWF-2/NS-LT600B-2/NS-DA2920/NS-DA2920-2/NS-DA2903/NS-DA2903-2 Congratulations on your purchase of one of the highest performing water filters on the market today. Insignia filters use a high-grade coconut carbon that has 50% more micro-pores than standard carbon. They also use fewer high-compression binders, giving you the best water filtration possible. Package contents • Refrigerator filter(s) (1 or 2 pack) • Quick Setup Guide General installation guidelines 1 YOU MUST SOAK your new filter in water for 15 minutes prior to installing it in your refrigerator. This is needed to remove air from the carbon block. 2 It is normal for black carbon fines (particles) to appear on the outside of your filter. This happens when the filter is jarred in shipping, it is safe, simply wipe it off. 3 Connections on our filters are larger in size to prevent leakage. This might require more hand leverage to install. Installation: *PUSH AND TURN HARD To remove turn counter-clockwise To install turn clockwise Do not remove the O-ring Filter receivers are designed to be flexible. Don't worry, they won't break! Before using your new product, please read these instructions to prevent any damage. 4 After installing, run about two to three gallons of water through your refrigerator's water dispenser to remove air and loose carbon pieces. The water may be cloudy and sputter until the air is removed. 5 We apply a safe, NSF approved, food grade silicone lubricant to our filter connectors (jelly like substance). NS-DA2903 or NS-DA2903-2 (Samsung) 1 Remove the old filter by rotating it a quarter turn counterclockwise, then pull it straight down. The water automatically turns off. 2 Align the top of your new filter with the receiver, then push it up until it stops. 3 Rotate the filter a quarter turn clockwise to secure the filter. NS-MWF-2 (GE, Hotpoint, Amana, and Kenmore) 1 Remove the old filter by rotating it a half turn counterclockwise, then pull it straight down. The water automatically turns off. 2 If you have a Kenmore refrigerator, check if there is a plastic or metal cap that covers the top of the old filter. If there is, pull off the cap and attach it to your new filter. If there is not, continue to step 3. 3 Align the top of your new filter with the receiver, then push it up until it stops. 4 Rotate the filter a half turn clockwise to secure the filter, then twist a little more to prevent leaks. NS-LT600B-2 (LG and Kenmore) 1 Remove the old filter by rotating a half turn counterclockwise, then pull it out. The water automatically turns off. 2 If you have a Kenmore refrigerator, check if there is a plastic or metal cap that covers the top of the old filter. If there is, pull off the cap and attach it to your new filter. If there is not, continue to step 3. 3 Align the top of your new filter with the receiver, then push it in until it stops. 4 Rotate the filter a half turn clockwise to secure the filter, then twist a little more to prevent leaks. NS-DA2920 or NS-DA2920-2 (Samsung) 1 Remove the old filter by rotating it a 1/4 turn counterclockwise, then pull it out. 2 Align the top of your new filter with the receiver, then push it up until it stops. 3 Rotate the filter a 1/4 turn clockwise to secure the filter. Before using your filter If your refrigerator has a change filter indicator, reset it. See "Resetting your filter indicator" for instructions.