Insignia NS-FANT12-CH Quick Setup Guide - Page 2

USING YOUR FAN Speed selection The power switch is incorporated in the speed control switch on the top of the fan. 0 - The fan is switched off. 1 - The fan operates at a low speed. 2 - The fan operates at a medium speed. 3 - The fan operates at a high speed. ONE-YEAR LIMITED WARRANTY Visit www.insigniaproducts.com for details. CONTACT INSIGNIA: For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC ©2016 Best Buy. All rights reserved. Made in China Oscillation To allow the fan to oscillate, push the knob down next to the fan speed control. Pull up on the knob if you don't want it to oscillate. Angle adjustment 1 Loosen the adjustment knob. 2 Adjust the fan to the angle you want, then retighten the knob to secure the fan at that angle. Adjustment knob REPLACING THE FUSE Warning: Risk of fire. Replace the fuse only with a 5A, 125 Volt fuse. Do not force the fuse into place. 1 Unplug the fan. 2 Slide open the fuse access cover on top of the AC power plug. 3 Remove the fuse. 4 Replace the fuse, then slide the fuse access cover closed. Caution: Do not replace the AC power plug. Discard the product if the plug is damaged. CLEANING YOUR FAN • Unplug the fan. • Clean plastic parts with mild soap and a damp cloth or sponge. Thoroughly remove soap film with clear water. • Do not splash water or other liquid into the motor. V4 ENGLISH 16-0138