Insignia NS-HFMS80 User Guide - Page 29
STEP 22: Install the doors
View all Insignia NS-HFMS80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
STEP 22: Install the doors You need: Phillips screwdriver Console for TVs up to 80" 1 Align one door (I) to the pre-attached bolts on the two hinges (GG) with the threaded holes on the hinge supports on the left side panel (C), then secure with a Phillips screwdriver. 2 Repeat the same process to attach the other door (I) to the right side panel (D). 3 Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws on the hinge arm for a better fit. www.insigniaproducts.com 29
www.insigniaproducts.com
29
Console for TVs up to 80”
STEP 22: Install the doors
You need:
1
Align one door (
I
) to the pre-attached bolts on the two hinges (
GG
) with the threaded holes on the hinge supports on
the left side panel (
C
), then secure with a Phillips screwdriver.
2
Repeat the same process to attach the other door (
I
) to the right side panel (
D
).
3
Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws on the hinge
arm for a better fit.
Phillips screwdriver