Insignia NS-HMG1856 User Guide - Page 6
Step 2: Attaching the connecting bars, You'll need
View all Insignia NS-HMG1856 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
NS-HMG1856 Step 2: Attaching the connecting bars 1 Attach the four middle bars (F) to the back frame (D) with four 1/2" pan head screws (J), and a Phillips screwdriver. 2 Attach two metal brackets (G) to the back frame (D) with two 1/2" pan head screws (J) and a Phillips screwdriver. Make sure that the brackets face outward. Note: Do not fully tighten the screws until assembly is complete. 3 Attach the two side frames (E) to the back frame (D) with four 1/2" bolts (I) and an Allen wrench. Note: Do not fully tighten the bolts until assembly is complete. You'll need: G Metal brackets (Qty. 2) J 1/2" pan head screws (Qty. 6) I 1/2" bolts (Qty. 4) M Allen wrench Phillips screwdriver 6 www.insigniaproducts.com
6
NS-HMG1856
www.insigniaproducts.com
Step 2: Attaching the connecting bars
1
Attach the four middle bars (F) to the back frame (D) with four 1/2” pan head screws (J), and a Phillips
screwdriver.
2
Attach two metal brackets (G) to the back frame (D) with two 1/2” pan head screws (J) and a Phillips screwdriver.
Make sure that the brackets face outward.
Note
: Do not fully tighten the screws until assembly is complete.
3
Attach the two side frames (E) to the back frame (D) with four 1/2” bolts (I) and an Allen wrench.
Note
: Do not fully tighten the bolts until assembly is complete.
You’ll need:
J
1/2” pan head
screws (Qty. 6)
G
Metal brackets
(Qty. 2)
Phillips screwdriver
M
Allen wrench
I
1/2” bolts (Qty. 4)