Insignia NS-HTVMFAB Quick Setup Guide - Page 8
Option 2: Attaching the mounting hardware to TVs, with irregular or obstructed backs
 |
View all Insignia NS-HTVMFAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
NS-HTVMFAB STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs 1 Place spacers (09) over the screw holes on the back of the TV. 2 Align the left and right TV brackets (01) with the screw holes on the back of the TV. Make sure that the brackets are level. 3 Place washers (07 or 08) over the holes in the TV brackets. Insert screws (05 or 06) through the washers, TV brackets, and spacers. 4 Tighten the screws until they are snug against the TV brackets. Do not over tighten. 05 or 06 09 01 07 or 08 You'll need Screws or 05 (4) Washers 06 (4) Spacers or 07 (4) 08 (4) 09 (4) Level Phillips screwdriver 8 www.insigniaproducts.com 01 TV brackets (2)
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
 |
 |
NS-HTVMFAB
8
www.insigniaproducts.com
STEP 3 -
Option 2: Attaching the mounting hardware to TVs
with irregular or obstructed backs
1
Place spacers (
09
) over the screw holes on the back of the TV.
2
Align the left and right TV brackets (
01
) with the screw holes on the back of the TV. Make sure that the
brackets are level.
3
Place washers (
07
or
08
) over the holes in the TV brackets. Insert screws (
05
or
06
) through the washers,
TV brackets, and spacers.
4
Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You’ll need
09
07
or
08
05
or
06
01
07
(4)
05
(4)
Phillips screwdriver
Screws
Washers
Spacers
09
(4)
01
TV
brackets (2)
08
(4)
06
(4)
or
or
Level