Insignia NS-P10DVD18 Quick Setup Guide - Page 2
Troubleshooting, Legal Notices, Connecting Headphones, Connecting To A Tv Or Monitor, Important
View all Insignia NS-P10DVD18 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
CONNECTING HEADPHONES When headphones are plugged into the (headphone) jack, no sound comes from the built-in speaker. To connect headphones: • Plug one pair of headphones (not included) into the (headphone) jack. • For two headphones, plug each headphone (not included) into a y-cable (not included), then plug the y-cable into the (headphone) jack. CONNECTING TO A TV OR MONITOR You can connect your DVD player to a TV or monitor so you can watch DVDs on the TV or monitor. 1 Plug the end of an AV adapter cable (not included) that has one black connector into the AV OUT jack on your DVD player. 2 Plug the connectors on an RCA cable (not included) into the connectors on the other end of the AV adapter cable (not included). Make sure that the colors on the connectors match. 3 Plug the other end of the RCA cable into the AV jacks on the TV or monitor, making sure to match the colors on the connectors with the jacks. Note: You may have to select the correct input on your TV or monitor. TV or Monitor White = left audio Red = right audio Yellow = video RCA cable (not included) AV OUT OFF/ ON AV adapter cable (not included) AUDIO In VIDEO In Playing a DVD or audio CD Note: Most DVDs and your DVD player have region codes that help control illegal distribution of DVDs. The region code for your player is 1. You can only play DVDs with a region code of 1 or ALL. The region code for a DVD is printed on the DVD or the DVD packaging. 1 Make sure that your player is connected to power. 2 Slide the OFF/ON switch to the ON position. 3 Press the OPEN ( ) button. The disc tray opens. 4 Place a disc, label side up, in the disc tray, then close the tray. The disc starts playing automatically. TROUBLESHOOTING PROBLEM No power. SOLUTION • Make sure that the AC power adapter is plugged in and connected. • Make sure that your player is turned on. No sound or distorted sound. • Adjust the volume and make sure mute is not turned on. • Make sure that headphones are not plugged in. When headphones are plugged in, the built-in speaker is turned off. • Make sure that all cables are inserted correctly into the appropriate jacks. • Make sure that your player is not paused. • Make sure that your player is not in fast forward or fast reverse mode. • Make sure that your player is not too hot. Let it cool for 30 minutes, then try it again. Picture is distorted. • During fast-forwarding or fast-reversing, distortion is normal. • The DVD may be damaged. Try another DVD. Disc does not play. • Make sure that the disc is inserted with the label side up. • Make sure that the disc is compatible with your player. Your player can play DVDs and audio CDs. LEGAL NOTICES FCC Statement This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user's authority to operate this equipment. IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with a dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufactur- er's instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. The wide blade is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specific by the manufacturer. 12 Unplug this apparatus during lightning storms or when unused for long periods of time. 13 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14 To reduce the risk of fire or electric shock, do not expose this device to rain, moisture, dripping, or splashing, and no objects filled with liquids, such as vases, shall be placed on it. 15 The wall plug is the disconnecting device. The plug must remain readily operable. ONE-YEAR LIMITED WARRANTY For complete warranty, visit www.insigniaproducts.com. CONTACT INSIGNIA For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2017 Best Buy. All rights reserved. Made in China V1 ENGLISH 17-0349