Insignia NS-P9DVD15 User Manual (English) - Page 14

NS-P9DVD15 Portable DVD Player Using your player Turning on your player To turn on your player: 1 Slide the ON/OFF switch on the side of your player to the ON position. 2 The start-up picture (DVD VIDEO) appears on the screen. 3 After use, slide the ON/OFF switch to the OFF position. Playing a DVD or audio CD Notes • Most DVDs and your player have region codes that help control illegal distribution of DVDs. The region code for your player is 1. You can only play DVDs with a region code of 1 or ALL. The region code for a DVD is printed on the DVD or the DVD packaging. • This User Guide explains the basic instructions for operating this unit. Some DVDs are produced in a manner that allows specific or limited operation during playback. Therefore, this unit may not respond to all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the specific DVD in question for more information about the options available on that DVD. • " " may appear on the screen during operation. A " " means the desired operation is not permitted by the unit or disc. To play a disc: 1 Make sure that your player is connected to power or that the battery is charged. 2 Slide the ON/OFF switch on the side of your player to the ON position. 3 Press the open ( ) button to open the disc door. The disc door opens. 4 Place a disc, label side up, in the disc tray, then close the tray. The disc starts playing automatically. If playback does not begin automatically, press on the player. Controlling DVD or audio CD playback To control disc playback: • Press Stop ( ) once to stop playback. Your player remembers where you stopped. If you press , your player starts playing at the point where you stopped. 14 www.insigniaproducts.com