Insignia NS-PDP42 RS232 Serial Commands (English) - Page 5

10. Color (Command: k i) To adjust screen color. You can also adjust color in the Picture menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to 'Real data mapping 1' as shown below. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] 11. Tint (Command: k j) To adjust screen tint. You can also adjust tint in the Picture menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red: 0 ~ Green: 64 (*transmit by Hexadecimal code) *Refer to 'Real data mapping 1' as shown below. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x] 12. Sharpness (Command: k k) To adjust screen sharpness. You can also adjust sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to 'Real data mapping 1' as shown below. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 13. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 0: OSD off Data 1: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 14. Remote Control Lock Mode (Command: k m) To lock the remote control and the front panel controls on the set. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 0: Lock off Data 1: Lock on Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] If you're not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released. 15. Treble (Command: k r) To adjust treble. You can also adjust treble in the Audio menu. Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to 'Real data mapping 1' as shown. Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x] 16. Bass (Command: k s) To adjust bass. You can also adjust bass in the Audio menu. Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to 'Real data mapping 1' as shown below. Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x] 17. Balance (Command: k t) To adjust balance. You can also adjust balance in the Audio menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to 'Real data mapping 1' as shown below. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] 18. Color Temperature (Command: k u) To adjust color temperature. You can also adjust color temperature in the Picture menu. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 0: Medium 1: Cool 2: Warm 3: User Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] 19. Red Adjustment (Command: k v) To adjust red in color temperature Transmission [k][v][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: C8 *Refer to 'Real data mapping 2' as shown below. Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] 20. Green Adjustment (Command: k w) To adjust green in color temperature. Transmission [k][w][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: C8 *Refer to 'Real data mapping 2' as shown below. Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x] *Real data mapping 1 0: Step 0 A: Step 10 (SET ID 10) *Real data mapping 2 0: -20 : -19 A : -18 F: Step 15 (SET ID 15) 10: Step 16 (SET ID 16) 63: Step 99 (SET ID 99) 64: Step 100 5F: -1 64: 0 69: +1 C3: +19 C8: +20 APPENDIX 93