Insignia NS-PSJMCC User Manual - Page 6

Setting up the shredder Warning Crosscut shredders have very sharp exposed blades on the underside. Use care when mounting the shredder on the wastebasket. Caution The shredder should not be plugged in during assembly. Note The following illustrations are for information purposes only. Your actual shredder may look somewhat different than the shredder shown. To set up the shredder: 1 Position the shredder head over the basket. 2 Place the shredder head on the basket so that it solidly rests on the basket edges. Note Always make sure that these two labels are aligned on the same side of the shredder when you place the shredder head onto the basket. This shredder has a safety interlock which prevents it from operating unless the shredder head is placed on the basket correctly. 6 www.insigniaproducts.com