Insignia NS-R5101AHD-A Quick Setup Guide (English) - Page 2

NS-R5101AHD-A_10-0563_QSG_V2_EN.eps 2 5/7/2010 9:26:52 AM Setting up your home theater system 1 Finding a location for your home theater system • Install your home theater system on a stable flat surface. Position your receiver so that it has a direct line of sight to the remote control. • Do not expose your system to extremes of temperature or humidity. • Avoid placing your system on a hot surface such as on top of other hot running equipment. Make sure that there is adequate ventilation to your system. CAUTION: Connect the AC cord only after the speakers, antenna, and all optional equipment have been connected. Never make or change any connections with the power turned on. To connect the subwoofer: Using a subwoofer RCA cable, connect the AV receiver's SUBWOOFER PRE OUT jack to an input on your powered subwoofer, as shown. Front right speaker Center speaker Front left speaker Connecting external components Front AUX input Back Digital Component Composite video and IN video audio L/R jacks 2 Placing your speakers 1 Center speaker Connect your components to the appropriate jacks. For information on assigning inputs, see This speaker enhances the front speakers, making sound movements distinct and providing a full-sound image. In movies it is used mainly for dialog. Position it close to your Powered subwoofer 4 Connecting devices Surround right speaker Surround left speaker "Setting up HDMI input (HDMI Input menu)" in your User Guide. 5 Connecting the power • Plug the power cord into an AC outlet. TV facing forward at about ear level, or at the Connecting the antenna Your new system features the Audyssey 2EQ® room same height as the front speakers. 2 Front speakers Note: The receiver won't pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner. correction and speaker setup These provide the overall sound. Their role in a 1 Connect the FM antenna to your receiver. With the supplied calibration microphone, Audyssey 2EQ automatically determines the number home theater system is to provide a solid anchor 2 Connect the AM loop antenna to the receiver. of speakers connected, their size (for purposes of bass management), optimum crossover for the sound image. They should be positioned Connecting audio components C facing the listener at about ear level, and equidistant from the TV. Angle them inward so HDMI cable M as to create a triangle, with the listener at the apex. Receiver 3 Subwoofer frequencies to the subwoofer (if present), and distances from the primary listening position. Audyssey 2EQ then removes the distortion caused by room acoustics by capturing room acoustical problems over the listening area in both the frequency and time domain. The result is clear, well-balanced sound for everyone. Y The subwoofer handles the bass sounds of the LFE (Low-Frequency Effects) channel. The Enabling Audyssey 2EQ lets you also use Audyssey Dynamic EQ®, which maintains the proper CM volume and quality of the bass output from your subwoofer will depend on its position, octave-to-octave balance at any volume level. MY the shape of your listening room, and your listening position. In general, a good bass sound can be obtained by installing the subwoofer in a front corner, or at one-third the For additional information on utilizing Audyssey, see your User Guide. This product includes Rocketboost™ Expandable Wireless Audio CY width of the wall, as shown. Blu-ray disc/DVD player Technology. With Rocketboost™ the AV receiver can send wireless CMY 4 Surround speakers TV or projector Game console K These speakers are used for precise sound positioning and to add realistic ambience. Other cables Position them at the sides of the listener, or slightly behind, about two to three feet Video (60 to 100 cm) above ear level. Ideally they should be equidistant from the listener. Audio Receiver audio for surround sound, subwoofer, and 2nd zone and receives wireless audio from other Rocketboost™ devices. For instructions on setting up Rocketboost™, see your User Guide. Troubleshooting For additional information on setting up your speakers, refer to the User Guide. For information on troubleshooting, refer to the User Guide. 3 Connecting your speakers to the receiver Speaker configuration The following table indicates the channels you should use depending on the number of speakers that you have. For 5.1-channel surround-sound playback, you need five speakers and a powered subwoofer. For additional information on configuring your speakers, Number of channels 2 3 4 5 Front speakers X X X X Center speaker X X Surround speakers X X refer to the User Guide. To connect the speaker cables: 1 Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown. 2 Loosen the speaker terminals on the receiver and insert the speaker wires into the terminals. The following illustration shows which speaker should be connected to each pair of terminals. 3 Tighten the terminals to secure the wire. Blu-ray disc/DVD player TV or projector Game console For additional information on deciding which connections to use, refer to the User Guide. Connecting components with HDMI Game console Satellite, cable, or set-top box TV or projector Blu-ray disc/DVD player Specifications For information on specifications, refer to the User Guide. FCC Part 15 This device complies with Part 15 of the FCC Rules. FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user's authority to operate this equipment. ICES-003 Class B Notice This Class B digital apparatus complies with Canadian ICES-003. One-year limited warranty Visit www.insigniaproducts.com for details. Contact Insignia: For customer service please call 1-877-467-4289 www.insigniaproducts.com Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645 SN 29400381 Connect your components to the appropriate jacks. For information on assigning inputs, see "Setting up HDMI input (HDMI Input menu)" in your User Guide. © 2010 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. ENGLISH 10-0563