Insignia NS-RBM10WH7 User Guide - Page 23

10.2 cu.ft. Bottom Mount Refrigerator Problem Possible cause Possible solution The refrigerator door does not close completely. Food packages are interfering Move the food packages or remove some food. with the door. The shelves are out of position. Adjust the shelves properly. The door gaskets are dirty. Clean the door gaskets. The refrigerator is not level. Level the refrigerator with the leveling feet. The exterior of the This is normal. refrigerator is warm. There is a popping or crackling sound when the compressor comes on. This is normal. The sound should level off or disappear as the refrigerator continues to run. There is a bubbling or This is normal. gurgling sound, like water boiling. Vibrations. The refrigerator is not on a Make sure that the refrigerator is on a level, sturdy surface. level or sturdy surface. Level the refrigerator with the leveling legs. The refrigerator may be touching a wall. Make sure that the refrigerator is not touching a wall. There is moisture The door may be slightly open. Make sure that the door closes completely. forming on the external walls of the refrigerator. Final notes The refrigerator enclosure may emit heat during operation especially in the summer. This is caused by heat from the condenser and it is a normal phenomenon. You may notice condensation on the exterior surface and door seals of the freezer when the ambient humidity is high, this is a normal phenomenon. The condensation can be wiped away with a dry towel. A buzz will be emitted by the compressor running, especially when starting up or shutting down. Specifications Dimensions (WxDxH) Weight Power requirements Current 24 x 27.4 x 59.8 in. (61 x 69.5 x 152 cm) 128 lbs. (58 kg) 115V ~ 60 Hz 1.1 A www.insigniaproducts.com 23