Insignia NS-S10MCBK2 Quick Setup Guide - Page 1
Insignia NS-S10MCBK2 Manual
View all Insignia NS-S10MCBK2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
QUICK SETUP GUIDE 10-Sheet Micro Cut Shredder NS-S10MCBK2 / NS-S10MCBK2-C PACKAGE CONTENTS • Micro cut shredder with wastebasket • Quick Setup Guide FEATURES • Shreds up to 10 sheets of paper at one time • Destroys credit cards, compact discs, small staples, and small paper clips • Micro-cut size .16 × .5 in. (4 × 12 mm) protects sensitive data • 5.3 gal (20 l) capacity wastebasket holds shredded waste and is easy to empty Buttons Auto Rev Fwd Overload Door open Overheat LED indicators Before using your new product, please read these instructions to prevent any damage. # ITEM 1 Shredding slot 2 Shredding slot (CD/DVD) 3 LED indicators 4 Button panel DESCRIPTION Insert up to 10 sheets of paper or one credit card at a time. Insert one credit card or one disc at a time. Overload: Lights when trying to shred over the maximum 10 sheets or when the paper is folded. When overloaded, the cutter turns off automatically. Overheat: Lights when your shredder has overheated. When overheated, the shredder stops shredding. After 20 minutes, the indicator turns off and the shredder can shred again. Door open: Lights when the shredder head is not on the wastebasket or when the head is not in the correct position on the wastebasket. Rev: Press to reverse the shredder for five seconds. Press and hold to reverse the shredder until you release the button. Reverses the paper in the slot to clear a jam or remove unshredded paper. Auto: Automatically shreds an item when inserted into the shredding slot. The POWER indicator lights blue. After shredding, the shredding stops automatically. The Auto indicator lights solid blue, then turns off when shredding is complete. Fwd: Press to shred for five seconds. Press and hold to shred until you release the button. Note: When you press Fwd, the AUTO LED indicator will flash blue. Use Fwd to make sure that the remaining paper in the slot gets shredded or to clear the slot. 5 Handles 6 Window 7 Wastebasket 8 Wheels 9 POWER switch Let you easily lift up the shredder head to empty the paper inside the wastebasket. Make sure that your shredder is turned off before you move your shredder. Lets you see how much shredded material is in the wastebasket. Holds the paper, cards, and discs that you have shredded. Empty the wastebasket when it is 2/3 full (to the top of the window). Let you move your shredder to a new location. The brakes on the front wheels prevent your shredder from moving. Turns your shredder on and off. Located on the back of the shredder. SETTING UP YOUR SHREDDER 1 Push the wheel casters into the holes on the bottom of your shredder. The wheels with the brake levers go into the front holes. 2 Place the wastebasket upright on a level surface. 3 Lock the wheel brakes (press the levers down with your foot) to keep your shredder from moving. Note: Your shredder must be at least 2 in. (5 cm) from any walls for ventilation purposes. 4 Attach the shredder head to the basket. Make sure that it fits correctly. 5 Place the wastebasket securely in the shredder. Note: Do not use plastic bags to line the wastebasket. 6 Connect the power cord to a power outlet. Do not use an extension cord. USING YOUR SHREDDER 1 Turn the shredder on by pressing the POWER switch on the back of the unit to I. 2 Press the Auto button to turn on auto mode, the Auto button is blue when activated. Auto 3 Insert up to 10 sheets of paper or one credit card at a time into the shredding slot. Your shredder automatically shreds what you insert. Note: Don't put envelopes, adhesive material, newsprint, transparencies, laminated documents, continuous forms, cardboard, or hard plastic materials (except credit cards) through the shredder. You can shred small staples and small paper clips, if they are attached to the paper you are shredding. 4 If the shredder jams, press Rev to reverse the paper, then press the Auto button. The shredder will operate normally again when the jam is cleared. Rev 5 When the wastebasket is 2/3 full, move the power button to O, unplug the cord from the power outlet, then pull-out and empty the wastebasket. Note: For best performance, we recommend that you shred for 15 minutes, then let your shredder cool for 20 minutes.