Insignia NS-SB316 Quick Setup Guide English - Page 1

Quick Setup Guide | NS-SB316 Soundbar Home Theater Speaker System with Bluetooth PACKAGE CONTENTS Soundbar Remote control FEATURES Top view AC adapter Back view Remote control RCA audio cable Wall mounting template 3.5 mm audio cable Quick Setup Guide FIND YOUR USER GUIDE ONLINE! Go to www.insigniaproducts.com, then click Support & Service. Enter NS-SB316 in the box under Manual, Firmware, Drivers & Product Information, then click ►. # DESCRIPTION 1 Standby indicator 2 (Power) button and indicator 3 (source) button and input source indicator 4 Sound mode indicator and DSP (Digital Signal Processor) button 5 VOL +/- buttons 6 BASS button and indicator 7 Hanging brackets 8 SUBWOOFER OUT jack 9 DC IN jack 10 SOURCE 3 - RCA IN (R and L) jacks 11 SOURCE 2 - AUX IN jack 12 SOURCE 1 - OPTICAL jack 13 (Power) button 14 SOURCE buttons 15 DSP buttons 16 (Mute) button 17 VOL +/- buttons 18 BASS button FUNCTION Lights when the soundbar is in standby mode. Press to turn on the soundbar. The indicator turns green. Press again to return the soundbar to standby mode. Press repeatedly to cycle through the available sound sources: • Source 1 - Optical • Source 2 - AUX IN • Source 3 - RCA • - Bluetooth Indicates which source is selected to provide sound for the soundbar. Lights to indicate the DSP sound mode selected: • Standard - Lets you enjoy normal sound. • Theater - Best for enjoying movies. Bass frequencies are enhanced. • News - Select for clear voice reproduction. Press repeatedly to cycle through the available DSP sound modes (Standard>Theater>News). Press to increase or decrease the volume of the soundbar. Press to activate the bass frequency enhancement. The indicator turns green. Press again to turn off the bass frequency enhancement. Use to hang the soundbar on a wall. Connect a powered subwoofer to this jack. Connect the AC adapter to this jack to power the soundbar. If your TV (or other audio source device) has RCA OUT jacks, connect the RCA cables to your source device and these jacks. If your TV (or other audio source device) has an AUX OUT or headphone jack, connect the 3.5 mm audio cable to your source device and this jack. If your TV (or other audio source device) has an Optical OUT jack, connect a digital optical cable (not included) to your source device and this jack. Press to turn on the soundbar. Press again to put the soundbar into standby mode. Press to select the sound source for your soundbar: • Source 1 - Optical • Source 3 - RCA • Source 2 - AUX IN • - Bluetooth Press to select the Digital Signal Processor (DSP) sound mode: • Standard • Theater • News The corresponding indicator on the soundbar top panel lights to indicate the sound mode selected. Press to mute the sound from the soundbar. Press again to restore the sound. Press to increase or decrease the volume of the soundbar. Press to activate the bass frequency enhancement. CONNECTING THE SOUNDBAR Look at the back of your source device, such as a TV, DVD/Blu-ray player, or cable box, to identify your audio OUT ports. Choose one connection option below that fits your audio source. You can connect several devices and switch the sound source as needed. Caution: Turn off or unplug all devices while you are making connections. Note: If you mounted your soundbar on a wall, you must use the included right-angle cable connectors for the AUX IN or RCA cable connections. AUDIO QUALITY BEST GOOD GOOD JACK TYPE (on source device) CABLE Digital optical cable (not included) 3.5 mm audio cable (included) RCA audio cable (included) - PICK ONE - Digital connections (BEST) 1 Connect one end of the digital optical cable (not included) to your soundbar. 2 Connect the other end into the Digital Optical Output port on your audio source device. 3 Change the device's audio output to 'PCM' format (typically found in Audio Settings). Refer to the documentation that came with your audio source device for more information. TV or DVD/Blu-ray player Digital optical cable (not included) - OR - 3.5 mm connection (GOOD) 1 Connect the right-angled connectors of the 3.5 mm audio cable to your soundbar. 2 Connect the other ends of the 3.5 mm audio cable into the Audio Output port or headphone jack on your audio source device. TV or DVD/Blu-ray player - OR - RCA connection (GOOD) 1 Connect the right-angled connectors of the RCA audio cable to your soundbar. 2 Connect the other end of the RCA audio cable into the Audio Output ports on your audio source device. Note: Make sure that the cable ends match the color of the ports. TV or DVD/Blu-ray player Back of the soundbar Back of the soundbar 3.5 mm audio cable (included) RCA audio cable (included) Before using your new product, please read these instructions to prevent any damage. Back of the soundbar CONNECTING A SUBWOOFER (OPTIONAL) Connect one end of the subwoofer cable (not included) to the subwoofer and the other end to the soundbar. Subwoofer (not included) Subwoofer cable (not included) Back of the soundbar CONNECTING THE AC ADAPTER Cautions: • Make sure that the electrical outlet matches the AC adapter's input requirements of 100-240 V, 50/60 Hz before connecting. • Use only the AC adapter provided. • Plug in the AC adapter only after all other connections have been made. 1 Connect the AC adapter to the DC IN jack on the back of the soundbar. 2 Plug the other end of the AC adapter into a power outlet or surge protector. 4 CONNECTING YOUR SOUNDBAR USING BLUETOOTH (OPTIONAL) Pairing your devices 1 Turn on your soundbar. 2 Place your Bluetooth device within 30 ft. (10 m) of your soundbar. 3 Select Bluetooth as the input source by pressing the (Bluetooth) button on the remote control or the (source) button on the soundbar. The blue Bluetooth indicator on the soundbar blinks slowly. 4 Navigate to your device's Bluetooth settings, turn on Bluetooth, then search for available devices. For additional information on pairing your device, refer to your devices' documentation. 5 On your Bluetooth device, select "NS-SB316" from the device list. Repeat steps 3-4 if "NS-SB316" is not displayed. 6 If a PIN code is requested, enter "0000." 7 When pairing is completed the Bluetooth indicator on the top of your soundbar lights solid blue. Notes: • Some devices, such as an iPhone, connect immediately after pairing, other devices, such as notebook computers, may ask you if you wish to connect. In this instance, the Bluetooth indicator continues to blink until a connection is established. • When you turn on your soundbar, it automatically connects to the last connected device if that device is in range. To connect to a different paired device, turn off Bluetooth or unpair from the currently paired device and manually connect to the other paired device. • When a call is received while playing music through a phone, the music stops automatically. • When the call ends, depending on the setting of your phone, the current track may resume playback. Disconnecting your devices • Turn off the Bluetooth function on your device. Note: For more information about using Bluetooth, see the online User Guide. OVER