Insignia NS-SH513 Quick Setup Guide (English) - Page 1

Congratulations on your purchase of a high-quality Insignia product. Your NS-SH513 represents the state of the art in Bluetooth/CD shelf systems and is designed for reliable and trouble-free performance. Package contents • Bluetooth/CD compact shelf system • Remote control and batteries (2) • Audio cable • Quick Setup Guide • FM antenna • Speaker wires (2) • User Guide Before using your new product, please read these instructions to prevent any damage. Installing the remote control batteries 1 Press the battery compartment cover latch, then remove the cover. 2 Insert two AAA batteries (included) into the battery compartment. Make sure that the + and - symbols on the batteries match the + and - symbols in the battery compartment. 3 Replace the cover. Connecting the FM antenna 1 Connect the FM antenna (provided) to the FM antenna interface on the back of your compact shelf system. 2 Arrange the antenna for best FM reception. FM antenna jack Connecting the speakers 1 Using the speaker wires (provided), connect the black (-) wires to the negative (-) speaker terminals (right and left) on your compact shelf system and to the negative (-) terminals on the right and left speakers. 2 Connect the red (+) wires to the positive (+) speaker terminals (right and left) on your compact shelf system and to the positive (+) terminals on the right and left speakers. Connecting the AC power • Plug the power cord into an AC outlet. Using your compact shelf system Turning on your compact shelf system • Make sure that the power switch on the back of the unit is turned on, then press STANDBY on the front of your compact shelf system or on the remote control. Selecting the sound source • Press SOURCE repeatedly on the front of your compact shelf system or on the remote control to select CD, TUNER, USB, BT (Bluetooth), or AUX. The source you select appears on the display. Adjusting the volume and muting the sound: • After you select the sound source you want, turn the VOLUME knob to set the volume to a comfortable level. • Press (mute) to mute the sound. Press (mute) again or press VOL+ or - to turn the sound back on. Adjusting the tone • In any mode, press TONE on the remote control to select Bass or Treble. While BASS or TREBLE is on the display, press VOL+ or - to adjust the level. Selecting the sound equalization • Press EQ to select the sound equalization you want. You can select: JAZZ, ROCK, CLASSIC, POP, LIVE, DANCE, or OFF (no equalization). Quick Setup Guide NS-SH513 | Bluetooth/CD Compact Shelf System Using Bluetooth Before you can use your compact shelf system with a Bluetooth device, you need to pair your device to the compact shelf system. To pair your devices using Bluetooth: 1 Make sure that a compatible Bluetooth device (like a music player or phone) is turned on and within 33 feet (10 meters) of your compact shelf system. 2 Press SOURCE one or more times, or press BT on the remote control, to switch to Bluetooth mode. The compact shelf system is now in Bluetooth pairing mode and the LED indicator will blink blue on and off. 3 On the Bluetooth device, go to the Bluetooth manager by doing one of the following: • For iPad/iPhone/iPod touch: From the home page, touch Settings > General >Bluetooth. • For Android Phone/Tablet: From the home page, touch Settings >Wireless and networks. Touch to activate Bluetooth, then touch Bluetooth settings. • For a PC or Mac: See the operating system instructions that came with your computer or OS. 4 On the Bluetooth device, select NS-SH513 in the list of found devices. 5 On the Bluetooth device, enter 0000 as the PIN, if prompted. The LED indicator lights solid blue on the compact shelf system. If you are pairing with a computer, make sure that your compact shelf system is selected as the computer's default playback device. See the computer's documentation for instructions. NOTES: • Some devices, such as an iPhone, connect immediately after pairing so the LED on the Bluetooth Music Receiver remains on. Other devices, such as notebook computers, may ask you if you want to connect. In this instance, the LED continues to blink until a connection is established. • Your compact shelf system saves pairing information for up to eight devices. However, it can only be connected and playing content from one device at a time. • When you turn on your compact shelf system, it automatically connects to the last connected device if that device is in range. To connect to a different paired device, you have to turn off Bluetooth or unpair from the currently paired device and manually connect to the other paired device. Playback operation • Playback is controlled by the Bluetooth device, by the buttons on the front of your compact shelf system, and by the remote control (such as VOL+/-, , , and ). To receive a phone call while playing music: • When a call is received while playing music through a phone, the music will stop automatically. • When the call ends, depending on the setting of your phone, the current track may resume playback. Using a USB device 1 Connect the USB flash drive to your compact shelf system. 2 Press SOURCE one or more times until "USB" appears on the display or press USB on the remote control. Your compact shelf system automatically detects the device and starts playback. NOTE: To control playback, use the controls on the compact shelf system or remote control. 3 To exit USB mode, switch to another mode using the remote control source buttons or the SOURCE button on your compact shelf system. NOTES: • A USB extension cable should have a maximum length of 1.6 ft. (0.5 m). • Depending on the amount of data and the media speed, it may as long as 60 seconds for your system to read the contents of the USB device. This is not a malfunction. • Even when the files are in a supported format, some may not play or display, depending on the content. • The file formats that your system can play are MP3, WMA with .mp3 and .wma extensions. Using an AUX device 1 Make sure that your compact shelf system is turned off. 2 Plug one end of an RCA stereo audio cable (included) into the AUX IN jack on the back of your compact shelf system and into the audio out or line out jack on the audio device. 3 Press SOURCE one or more times until "AUX" appears on the display or press AUX on the remote control. 4 Use the volume controls on your compact shelf system to control the volume. 5 Use the controls on the audio device to control playback. NOTE: You can also use the volume controls on the device to adjust the volume, but the volume control on your compact shelf system provides the best control. Using Radio Mode To play the radio: 1 If necessary, press SOURCE repeatedly to select FM (Tuner) mode or press FM on the remote control. "TUNER" appears on the display. 2 Press MO/ST to switch between mono and stereo Tuner mode. 3 To tune to a station, press the numbers buttons on your remote control to select a specific frequency. For example, to listen to 99.7 MHz, press 9, 9, then 7. You can also briefly press TUNE + or TUNE - on the remote control to tune the radio up or down one frequency step. 4 To scan to the next highest or lowest radio station with a strong signal, press and hold TUNE + or TUNE - for three seconds. NOTE: For information on saving and scanning to preset stations see your User Guide. Using your CD player You can play audio CDs, CD-Rs, and CD-RWs in a standard or 3" size. 1 Press SOURCE repeatedly to select CD mode. 2 Press EJECT to open the CD tray. 3 Insert a CD, label side up. 4 Press EJECT to close the CD tray. 5 Playback begins automatically. 6 Use the controls on the compact shelf system or remote control to control playback. NOTE: For more information on using your CD player, see your User Guide. For additional information on using your Bluetooth/CD Compact Shelf System, refer to the User Guide.