Insignia NS-STR514 User Manual (English) - Page 13

Insignia NS-STR514 Stereo Receiver with Bluetooth Listening to the radio This receiver supports two tuning modes selected by pressing the TUNE/PRESET button on the receiver. Each time this button is pressed, the mode changes as follows: • TUNE mode-the PRESET indicator turns off and the tuner scans through the available stations when using the / buttons on the receiver. • PRESET mode-the PRESET indicator lights up and the tuner only scans through stations saved into the preset memory when using the / buttons on the receiver. Auto tuning to a radio station 1 Repeatedly press INPUT on the receiver or TUNER on the remote to select AM or FM. The band you select (AM or FM) is shown on the display. OR Manually tuning a radio station Manual tuning is useful when you already know the frequency of the station you want to listen to. 1 Repeatedly press INPUT on the receiver or TUNER on the remote control to select AM or FM. The band you select (AM or FM) is shown on the display. OR 2 Tune to the station you want by repeatedly pressing: • The or buttons on the receiver. -OR• The TUNE or TUNE buttons on the remote control. 2 Tune to the station you want by pressing and holding: • The or buttons on the receiver for more than one second. -OR• The TUNE or TUNE buttons on the remote control for more than one second. OR The tuner searches until a station of sufficient strength has been found. The display shows the tuned frequency. Weak stations are skipped during auto tuning. 3 Repeat the process until you find a station you want. Note If the FM signal you select is weak/poor, select FM mono mode to reduce the noise. For more information, see "Listening to FM stereo broadcasts" on page 12. OR Note If the FM signal you select is weak/poor, select FM mono mode to reduce the noise. For more information, see "Listening to FM stereo broadcasts" on page 12. Presetting radio stations You can automatically or manually store as many as 30 preset stations in memory. Automatically presetting radio stations 1 Press and hold the MEMO button on the remote control or MEMORY button on the receiver for more than two seconds. AUTO MEM blinks on the display and the receiver automatically searches for and presets as many as 30 FM stations. www.insigniaproducts.com 11