Insignia NS-TWM16WH9 User Guide - Page 17

1.6 Cu. Ft. Portable Top-Load Washer Installing in an alcove or closet Minimum clearances between your washer and adjacent walls or other surfaces are: • Either side: 1 in. (2.5 cm) • Rear: 6 in. (15.2 cm) • Closet Front: 2 in. (5.1 cm) • Top: 24 in. (61 cm) If you install your washer and dryer side-by-side in a closet, the closet front must have an unobstructed air opening of at least 72 square inches (465 square cm). 24 in. (61 cm) 1 in. 1 in. 2 in. 3.9 in. 2.5 cm 20.3 in. (51.5 cm) 2.5 cm 5.1 cm 20.7 in. (52.5 cm) 10 cm Electrical requirements Warning: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Use a 120 Volt, 60Hz, 15 amp fuse or circuit breaker. We recommend an individual branch circuit that serves only your washer. Warning: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Warning: The electrical valve and capacitor of this appliance are intentionally not grounded and may present a risk of electric shock during servicing. Do not contact these electronic devices while the appliance is energized. Electrical grounding is required for your washer. www.insigniaproducts.com 17