Insignia NS-UZ14WH0 User Guide - Page 16

PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION The The room temperature This is normal. compressor is hotter than normal. turns on and off frequently. You have just added a large amount of food Allow time for the new food to cool, then check again. to the freezer. The door is not closed Check the door gasket and food distribution completely or was and make sure that the door closes opened too often. completely. The freezer has recently been disconnected for a period of time. Allow time for the freezer to cool before adding food. Four hours are required for the freezer to cool down completely. The thermostat was Set the thermostat to the correct setting. not set correctly. Control panel PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION The control panel The control panel is is unresponsive locked. I got an alert that The door is open. the door is open Press and hold the Lock button for three seconds to unlock the control panel. Close the door. Make sure that nothing is blocking the door. Make sure that the freezer is level. I got an alert that Warm foods may have Wait for the foods to cool. the temperature recently been added to is too high the freezer. The temperature is set Adjust the temperature. too high or too low. The room that the freezer is located in is too warm. Wait for the room temperature to drop. Specifications Dimensions (H × W × D) Outer (with handle): 61 x 28 x 29.5 in. (155 × 71.1 × 75 cm) Gross weight 178.6 lbs. (81 kg) Power requirements 115 V ~ 60 Hz Current 1.8 A Power Power consumption: 397 Kwh/year Power cord length 65 in. (165 cm) 16 www.insigniaproducts.com