Insignia NS-WBRDVD2 Quick Setup Guide (English) - Page 1

Congratulations on your purchase of a high-quality Insignia product. Your NS-WBRDVD2, NS-WBRDVD2-CA, NS-BRDVD4, and NS-BRDVD4-CA represents the state of the art in Blu-ray disc player design and is designed for reliable and trouble-free performance. Package contents • Blu-ray disc player • AAA batteries (2) • Remote control • User Guide • Quick Setup Guide Installing remote control batteries 1 Remove the battery compartment cover. 2 Insert two AAA batteries into the battery compartment. Make sure that the + and - symbols on the batteries match the + and - symbols in the battery compartment. 3 Replace the battery compartment cover. Connecting a TV Using HDMI (best) TV Using component (better) TV Audio cable Quick Setup Guide NS-WBRDVD2/NS-WBRDVD2-CA for Wireless Blu-ray Disc Player and NS-BRDVD4/NS-BRDVD4-CA for Wired Blu-Ray Disc Player Back of player Connecting to your home network This player can be connected to your wired network using the Ethernet port on the back of your player or using a wireless network. Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference. Connecting to the Internet with a wireless network (NS-WBRDVD2 and NS-WBRDVD2-CA only): 1 Set up your access point or wireless router (if not already set up). Player Wireless router Back of player Using composite (good) Component video cables TV Yellow=Video White=Left audio Red=Right audio Back of player To connect to a home theater, see your User Guide. Using Quick Setup 1 Press ENTER. The Settings menu opens. 2 Turn on your player and your TV. 3 Press ENTER. The Settings menu opens. 4 Select Network, then press ENTER. 5 Press  or  to select Wireless, then press ENTER. The Wireless Settings screen opens. Music 2 Press  or  to select Quick setup, then press ENTER. The Quick Setup menu opens. Follow the guide to set the most important settings for your player. 6 Press  or  to select Network List, then press ENTER. The Network List screen opens, showing a list of available wireless networks. 7 Select the wireless network you want your player to connect to. A Network Setup screen opens. 8 If your network does not use encryption, press  or  to select Connect, then press ENTER. If the wireless network is working, you should see a checkmark and a connected message on the TV. If the message does not appear, repeat the steps above. OR If your network uses encryption: a Press  or  to select the Password field, then press ENTER. An on-screen keyboard opens.