Intel AXXROMBSASMR Hardware User Guide - Page 17

2 Intel® Integrated RAID Module SROMBSASMR Hardware Installation Requirements • Intel® Integrated RAID Module SROMBSASMR, with the provided standoffs • A host system with an available 50-pin PCI Express* connector • Resource CD, which contains drivers and documentation • SAS or SATA 3.0 hard drives • Four provided SAS/SATA cables (for cable requirements, see step 6 in "Installing the RAID Module") Note: Intel Corporation strongly recommends using an uninterruptible power supply (UPS). Installing the RAID Module To install the RAID Module, follow these steps: 1. Turn off the power to the system, all drives, enclosures, and system components. Remove the power cord(s). 2. Remove the server cover. For instructions, see your server system documentation. 3. Insert the three snap standoffs into the matching holes in the server/workstation board. To locate the matching module card slot on your server/workstation board, see your server/workstation board documentation. Intel® Integrated RAID Module SROMBSASMR Hardware User's Guide 7