Intel BB5000XSLSATAR User Guide - Page 40
Installing the Processor
View all Intel BB5000XSLSATAR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Installing the Processor To install a processor, follow these instructions: 1. Observe the safety and ESD precautions in "Safety Information". 2. Turn off all peripheral devices connected to the server. Turn off the server. 3. Disconnect the AC power cord from the server. 4. Remove the server's cover. See the documentation that came with your server chassis for instructions on removing the server's cover. 5. Locate the processor socket and raise the socket handle completely (see Figure 8). AF000176 Figure 8. Lifting the Socket Handle 6. Push the rear tab with your finger tip to bring the front end of the load plate up slightly. Open the load plate as shown (see Figure 9). A B Figure 9. Open the Load Plate AF000177 Note: Do not touch the socket pins; they are very sensitive and easily damaged. 22 "Intel® Server Board S5000VSA User's Guide"