Intel BLKD410PTL Product Guide - Page 21
LAN Wake Capabilities, Wake from USB, Wake from PS/2 Device, PME# Wakeup Support
View all Intel BLKD410PTL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Desktop Board Features LAN Wake Capabilities The board's LAN wake capabilities enable remote wake-up of the computer through a network. The LAN subsystem network adapter monitors network traffic at the Media Independent Interface. The board supports LAN wake capabilities with ACPI in the following ways: • By Ping • By Magic Packet Upon detecting the configured wake packet type, the LAN subsystem asserts a wakeup signal that powers up the computer. Wake from USB USB bus activity wakes the computer from an ACPI S1 or S3 state. NOTE Wake from USB requires the use of a USB peripheral that supports wake from USB. Wake from PS/2 Device PS/2 keyboard activity wakes the computer from an ACPI S1, S3, S4, or S5 state. However, when the computer is in an ACPI S4 or S5 state, the only PS/2 activity that will wake the computer is the Alt + Print Screen key combination or the Power key available only on some keyboards. PME# Wakeup Support When the PME# signal is asserted on the PCI bus, the computer wakes from an ACPI S1, S3, S4, or S5 state. Wake from Serial Port Serial port activity wakes the computer from an ACPI S1 or S3 state. 21