Intel BLKD865GLCLK Product Specification - Page 70
Internal I/O Connectors
View all Intel BLKD865GLCLK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Intel Desktop Board D865GBF/D865GLC Technical Product Specification ✏ NOTE The back panel audio line out connector is designed to power headphones or amplified speakers only. Poor audio quality occurs if passive (non-amplified) speakers are connected to this output. 2.8.2 Internal I/O Connectors The internal I/O connectors are divided into the following functional groups: • Audio (see page 71) Auxiliary line in ATAPI CD-ROM Front panel audio • Power and hardware control (see page 73) Fans [3] ATX12V power Main power Chassis intrusion • Add-in boards and peripheral interfaces (see page 76) PCI bus AGP Parallel ATA IDE Diskette drive SCSI hard drive activity LED (optional) Serial ATA 2.8.2.1 Expansion Slots The board has the following expansion slots: • AGP connector: The AGP connector is keyed for Universal 0.8 V AGP 3.0 cards or 1.5 V AGP 2.0 cards only. Do not install a legacy 3.3 V AGP card. The AGP connector is not mechanically compatible with legacy 3.3 V AGP cards. • PCI rev 2.2 compliant local bus slots (six on the Desktop Board D865GBF, three on the Desktop Board D865GLC). The SMBus is routed to PCI bus connector 2 only (ATX expansion slot 6). PCI add-in cards with SMBus support can access sensor data and other information residing on the Desktop Board. ✏ NOTE This document references back-panel slot numbering with respect to processor location on the board. The AGP slot is not numbered. PCI slots are identified as PCI slot #x, starting with the slot closest to the processor. Figure 21 (page 76) and Figure 22 (page 77) illustrate the board's PCI slot numbering. 70