Intel BLKD915PSYL Product Specification - Page 34
Hardware Management Subsystem, LAN Subsystem Software, Intel, Wireless Connect Technology Optional
UPC - 735858166331
View all Intel BLKD915PSYL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Intel Desktop Board D915PGN/D915PSY Technical Product Specification 1.11.3 LAN Subsystem Software LAN software and drivers are available from Intel's World Wide Web site. For information about Obtaining LAN software and drivers Refer to Section 1.4, page 19 1.11.4 Intel® Wireless Connect Technology (Optional) Intel Wireless Connect Technology is available for Intel 82801FBW (ICH6W) based SKUs that use an Intel® PRO/Wireless 2225BG add-in card. Intel Wireless Connect Technology enables any desktop PC to join a wireless network or provide wireless Access Point services to a home or small office network through a wireless configuration wizard. Intel Wireless Connect Technology features the following: • Wireless LAN protocols 802.11 b, g • 11 Mbps performance with 802.11b • 54 Mbps performance with 802.11g • WEP, WPA (TKIP/802.1x), and MAC Address filtering for security • Wi-Fi and WHQL certified • Integrated Access Point that can support up to 16 clients 1.12 Hardware Management Subsystem The hardware management features enable the Desktop Boards to be compatible with the Wired for Management (WfM) specification. The Desktop Board has several hardware management features, including the following: • Fan monitoring and control (through the hardware monitoring and fan control ASIC) • Thermal and voltage monitoring • Chassis intrusion detection 1.12.1 Hardware Monitoring and Fan Control ASIC The features of the hardware monitoring and fan control ASIC include: • Internal ambient temperature sensor • Two remote thermal diode sensors for direct monitoring of processor temperature and ambient temperature sensing • Power supply monitoring of five voltages (+5 V, +12 V, +3.3 VSB, +1.5 V, and +VCCP) to detect levels above or below acceptable values • Thermally monitored closed-loop fan control, for all three fans, that can adjust the fan speed or switch the fans on or off as needed • SMBus interface For information about The location of the fan connectors and sensors for thermal monitoring on the D915PGN board The location of the fan connectors and sensors for thermal monitoring on Refer to Figure 13, page 36 Figure 14, page 37 34