Intel BLKDH61WWB3 Product Guide - Page 65
A Error Messages and Indicators, BIOS Error Codes
View all Intel BLKDH61WWB3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
A Error Messages and Indicators Intel Desktop Board DH61WW reports POST errors in two ways: • By sounding a beep code and blinking the front panel power LED • By displaying an error message on the monitor BIOS Error Codes Whenever a recoverable error occurs during POST, the BIOS causes the board's speaker to beep and the front panel power LED to blink an error message indicating the problem (see Table 13). Table 13. BIOS Beep Codes Type F2 Setup/F10 Boot Menu Prompt BIOS update in progress Video error (no addin graphics card installed) Memory error Thermal trip warning Pattern One 0.5 second beep when the BIOS is ready to accept keyboard input None Frequency/Comments 932 Hz On-off (1.0 second each) two times, then a 2.5-second pause (off), the entire pattern repeats (beeps and pause) once and the BIOS will continue to boot. 932 Hz For processors requiring an add-in graphics card On-off (1.0 second each) three times, then a 2.5-second pause (off), the entire pattern repeats (beeps and pause) until the system is powered off. 932 Hz Alternate high and low beeps (1.0 second each) for eight beeps followed by system shut down. High beep 2000 Hz Low beep 1500 Hz 65