Intel BLKDP67DE Product Specification - Page 45
Add-in Card Connectors
![]() |
View all Intel BLKDP67DE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Technical Reference Table 20. Front Panel CIR Receiver (Input) Header Pin Signal Name 1 Ground 2 LED 3 NC 4 Learn-in 5 5 V standby 6 VCC 7 Key (no pin) 8 CIR Input 2.2.2.2 Add-in Card Connectors The board has the following add-in card connectors: • PCI Express 2.0 x16: one PCI Express 2.0 x16 connector supporting simultaneous transfer speeds up to 8 GB/s of peak bandwidth per direction and up to 16 GB/s concurrent bandwidth. • PCI Express 2.0 x1: two PCI Express 2.0 x1 connectors. The x1 interface supports simultaneous transfer speeds up to 2.5 Gb/s of peak bandwidth per direction and up to 5.0 Gb/s concurrent bandwidth. • PCI Conventional (rev 2.3 compliant) bus: one PCI Conventional bus add-in card connector. Note the following considerations for the PCI Conventional bus connector: • The PCI Conventional bus connector is bus master capable. • SMBus signals are routed to the PCI Conventional bus connector. This enables PCI Conventional bus add-in boards with SMBus support to access sensor data on the desktop board. The specific SMBus signals are as follows: ⎯ The SMBus clock line is connected to pin A40. ⎯ The SMBus data line is connected to pin A41. 45
![](/manual_guide/products/intel-blkdp67de-product-specification-d9feb83/45.png)