Intel BLKDQ35JOE Product Specification - Page 34
ENERGY STAR, 14.1.3, Wake-up Devices and Events
UPC - 200001401862
View all Intel BLKDQ35JOE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Intel Desktop Board DQ35JO Technical Product Specification 1.14.1.2 ENERGY STAR* In 2007, the US Department of Energy and the US Environmental Protection Agency revised the ENERGY STAR* requirements. Intel has worked directly with these two governmental agencies to define the new requirements. Intel Desktop Boards will meet the new requirements depending on system configuration. For information about ENERGY STAR requirements and recommended configurations Refer to http://www.intel.com/go/energystar 1.14.1.3 Wake-up Devices and Events Table 9 lists the devices or specific events that can wake the computer from specific states. Table 9. Wake-up Devices and Events These devices/events can wake up the computer... LAN PME# signal ...from this state S1, S3, S4, S5 (Note1) S1, S3, S4, S5 (Note1) Power switch RTC alarm Serial port USB S1, S3, S4, S5 S3, S4, S5 S3 S3 WAKE# signal S1, S3, S4, S5 Notes: 1. For LAN and PME# signal, S5 is disabled by default in the BIOS Setup program. Setting this option to Power On will enable a wake-up event from LAN in the S5 state. 2. Wake from S4 and S5 is optional by the specification. NOTE The use of these wake-up events from an ACPI state requires an operating system that provides full ACPI support. In addition, software, drivers, and peripherals must fully support ACPI wake events. 34