Intel BOXD945GTPLR Product Specification - Page 53
Connectors
UPC - 735858174718
View all Intel BOXD945GTPLR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Technical Reference 2.8 Connectors CAUTION Only the following connectors have overcurrent protection: back panel USB, front panel USB, and PS/2. The other internal connectors are not overcurrent protected and should connect only to devices inside the computer's chassis, such as fans and internal peripherals. Do not use these connectors to power devices external to the computer's chassis. A fault in the load presented by the external devices could cause damage to the computer, the power cable, and the external devices themselves. This section describes the board's connectors. The connectors can be divided into these groups: • Back panel I/O connectors (see page 55) • Component-side I/O connectors (see page 53) 2.8.1 Back Panel Connectors The back panel configuration is dependent upon which audio subsystem is present. The configurations are as follows: • 8-channel (7.1) audio subsystem (five analog audio output connectors and one digital audio output connector), described on page 54 • 6-channel (5.1) audio subsystem (three analog audio output connectors), described on page 55 53