Intel D2700DC Technical Product Specification for Intel Desktop Board D2700DC - Page 69
Board Status and Error Messages, 4.1 BIOS Beep Codes
View all Intel D2700DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
4 Board Status and Error Messages 4.1 BIOS Beep Codes The BIOS uses audible beep codes to signal status messages and error messages indicating recoverable errors that occur during the POST. The beep codes are listed in Table 33. These beep codes can be heard through a speaker attached to the board's line out audio jack (see Figure 5, B on page 26). Table 33. BIOS Beep Codes Type Pattern BIOS update in progress Video error (Note) None On-off (1.0 second each) two times, then 2.5-second pause (off), entire pattern repeats (beeps and pause) once and the BIOS will continue to boot. Memory error On-off (1.0 second each) three times, then 2.5-second pause (off), entire pattern repeats (beeps and pause) until the system is powered off. Thermal trip warning Alternate high and low beeps (1.0 second each) for eight beeps, followed by system shut down. Note: Disabled per default BIOS setup option. Frequency 932 Hz When no VGA option ROM is found. 932 Hz High beep 2000 Hz Low beep 1500 Hz 69