Intel D33217CK Technical Product Specification - Page 19
System Memory
View all Intel D33217CK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Product Description 1.4 System Memory The board has two 204-pin SO-DIMM sockets and supports the following memory features: • 1.5 V DDR3 SDRAM SO-DIMMs with gold plated contacts • Support for 1.35 V Low Voltage DDR3 (new JEDEC specification) • Two independent memory channels with interleaved mode support • Unbuffered, single-sided or double-sided SO-DIMMs • 16 GB maximum total system memory (with 4 Gb memory technology). Refer to Section 2.1.1 on page 33 for information on the total amount of addressable memory. • Minimum recommended total system memory: 1024 MB • Non-ECC SO-DIMMs • Serial Presence Detect • XMP profile support for voltage detection • DDR3 1600 MHz, DDR3 1333 MHz, and DDR3 1066 MHz SDRAM SO-DIMMs NOTE To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with SO-DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the SO-DIMMs may not function under the determined frequency. Table 5 lists the supported SO-DIMM configurations. Table 5. Supported Memory Configurations Raw Card Version A SO-DIMM Capacity 1 GB 2 GB DRAM Device Technology 1 Gb 2 Gb DRAM Organization 64 M x 16 128 M x 16 # of DRAM Devices 8 8 1 GB B 2 GB 1 Gb 2 Gb 128 M x 8 8 256 M x 8 8 512 MB 1 Gb C 1 GB 2 Gb 64 M x 16 4 128 M x 16 4 2 GB 1 Gb 128 M x 8 16 F 4 GB 2 Gb 256 M x 8 16 8 GB 4 Gb 512 M x 8 16 Note: System memory configurations are based on availability and are subject to change. 19