Intel D410PT Intel Desktop Board D410PTL /D410PTLW Technical Product Specifica - Page 56
Reliability, Table 26., Maximum Load Configuration Current and Power Results
View all Intel D410PT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification • LAN linked at 100 Mb/s ⎯ Load: continuous read/write benchmark on remote share • All on board peripherals enabled (serial, audio, ...) Table 26. Maximum Load Configuration Current and Power Results Subsystem Current Draw at 12 V Power Consumption Minimum Load Configuration SATA DVD-R/W 1.591 A 0.323 A 19.092 W 3.876 W 3.5-inch SATA hard disk drive 0.798 A 9.576 W 2.5-inch SATA hard disk drive 0.418 A 5.016 W Intel Z-U130 USB Solid State Drive (or compatible device) (D410PTLW only) 0.053 A 0.636 W PCI cards on riser 0.118 A 1.416 W Host-powered USB devices (other than keyboard and mouse) Maximum Load Configuration 0.098 A 3.399 A 1.176 W 40.788 W 2.8 Reliability The Mean Time Between Failures (MTBF) prediction is calculated using component and subassembly random failure rates. The calculation is based on the Bellcore Reliability Prediction Procedure, TR-NWT-000332, Issue 4, September 1991. The MTBF prediction is used to estimate repair rates and spare parts requirements. The MTBF data was calculated from predicted data at 55 ºC. The Intel Desktop Board D410PTL MTBF is 254806 hours. The Intel Desktop Board D410PTLW MTBF is 253792 hours. 56