Intel D815EGEWLU Product Specification - Page 45
Connectors
UPC - 735858150590
View all Intel D815EGEWLU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Technical Reference 2.8 Connectors CAUTION Only the back panel connectors of the D815EGEW board have overcurrent protection. The board's internal connectors are not overcurrent protected and should connect only to devices inside the computer's chassis, such as fans and internal peripherals. Do not use these connectors to power devices external to the computer's chassis. A fault in the load presented by an external device may result in a high output current that could damage the board, the interconnecting cable, and the external device itself. For information about Overcurrent protection for the board's back panel connectors Refer to Table 18, page 47 This section describes the board's connectors. The connectors can be divided into the following groups: • Back panel I/O connectors (see page 46) PS/2 keyboard and mouse USB (two) VGA Parallel port Serial port A LAN (optional) Audio (line in, line out, and mic in) • Internal I/O connectors (see page 50) Audio (auxiliary line input and ATAPI CD-ROM) Fans (two) Power Wake on LAN technology (optional) Add-in boards (four PCI bus connectors) IDE (two) Diskette drive • External I/O connectors (see page 58) SCSI LED (optional) Front panel (power/sleep/message waiting LED, power switch, hard drive activity LED, reset switch, and auxiliary front panel LED) 45