Intel D845EBT Product Specification - Page 32
Audio Connectors, Audio Subsystem Software
View all Intel D845EBT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Intel Desktop Board D845EBT Technical Product Specification 1.11.3 Audio Connectors 1.11.3.1 Front Panel Audio Connector A 2 x 5-pin connector provides mic in and line out signals for front panel audio connectors. For information about Refer to The location of the connector Section 2.8.3, page 69 The signal names of the front panel audio connector Table 42, page 70 Obtaining the Front Panel I/O Connectivity Design Guide Section 1.4, page 17 ✏ NOTE The front panel audio connector is alternately used as a jumper block for routing audio signals. Refer to Section 2.9.1 on page 73 for more information. 1.11.3.2 ATAPI-Style CD-ROM Connector A 1 x 4-pin connector connects an internal ATAPI CD-ROM drive to the audio mixer. For information about The location of the ATAPI-style CD-ROM connector The signal names of the ATAPI-style CD-ROM connector Refer to Figure 12, page 62 Table 37, page 66 1.11.4 Audio Subsystem Software Audio software and drivers are available from Intel's World Wide Web site. For information about Obtaining audio software and drivers Refer to Section 1.2, page 16 32