Intel D845EPT2 D845EPT2_SpecUpdate06. - Page 13
Documentation Changes - audio drivers
View all Intel D845EPT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Intel Desktop Board D845EPT2 Specification Update DOCUMENTATION CHANGES The Documentation Changes listed in this section apply to the Desktop Board D845EPT2 Technical Product Specification (Order Number A84913). All Documentation Changes will be incorporated into a future version of that specification. 1. Change to Description of Table 40, Section 2.8.3, External I/O Connectors Table 40, Section 2.8.3, External I/O Connectors will change in its entirety as follows: Table 1. Front Panel Audio Connector Pin Signal Name Pin 1 MIC_IN_FP 2 3 MIC_BIAS 4 5 R_FNTOUT 6 7 Not Connected 8 9 L_FNT_OUT 10 Signal Name Ground V_5P0_AUD_ANALOG R_RETIN Key L_RETIN 2. Removed Note That Specifies USB 2.0 Support Limited to Windows* 2000 and Windows XP From Section 1.8.2, USB The following note will be removed in its entirety from Section 1.8.2, USB: ✏ NOTE USB 2.0 support has been tested with Windows 2000 and Windows XP drivers and is not currently supported by any other operating system. 3. Removed ESCD Format Reference From Section 3.3.1, PCI Autoconfiguration Remove the sentence "Autoconfiguration information is stored in ESCD format." from Section 3.3.1, PCI Autoconfiguration. 7